[Olsr-users] Iperf

[Mehdi Bezahaf]

Sorry it is not clear for me.
Your client is 11.1.1.2 and which machine is your server?

- from your  "iperf -c 129.217.166.113 -u -i 5 -t 20 -b 3m" I conclude  
that your server is "129.217.166.113". does it the case?

- From which machine is your traceroute ran? it seems that it isn't  
ran from your server machine "129.217.166.113"!!!



On 5 janv. 09, at 16:38, Resul Cetin wrote:

>> And what is your Iperf command line options?
>
>
> On the server side:
>
> iperf -s -u -i 5
>
> On the client side:
>
> iperf -c 129.217.166.113 -u -i 5 -t 20 -b 3m
>
>
>
>>
>> On 5 janv. 09, at 16:18, Resul Cetin wrote:
>>
>>>> Hi,
>>>> sorry i don't understand german :-) but can you ping for example  
>>>> your
>>> machines?
>>>
>>> Hii Mehdi,
>>>
>>> here is my ping result:
>>>
>>> traceroute to 11.1.1.2 (11.1.1.2), 30 hops max, 40 byte packets
>>> 1  129.217.166.113 (129.217.166.113)  0.694 ms  0.923 ms  1.180 ms 2
>>> 11.1.1.4 (11.1.1.4)  7.173 ms  8.505 ms  11.315 ms
>>> 3  11.1.1.2 (11.1.1.2)  30.775 ms  33.109 ms  38.223 ms
>>>
>>> My Client is 11.1.1.2. I tried also 11.1.1.2 as Server. I cann't
>>> also run
>>> Iperf between the routers 11.1.1.4 and 11.1.1.2.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>>
>>>> On 5 janv. 09, at 16:00, Resul Cetin wrote:
>>>>
>>>>> Hii,
>>>>>
>>>>> I want to use Iperf on Freifunk Firmware, the version number is
>>>>> v1.6.29.
>>>>> So far, I installed Iperf under following this instruction here:
>>> http://wiki.leipzig.freifunk.net/Iperf.
>>>>>
>>>>> If I run Iperf, I get not the correct information. The output on
>>>>> my router
>>>>> is:
>>>>> [  3] -1188645123.2--1188645122.2 sec  0.00 Bytes  0.00 bits/sec
>>>>> 0.000 ms
>>>>> 0/    0 (nan%)
>>>>> [  3] -1188645122.2--1188645121.2 sec  0.00 Bytes  0.00 bits/sec
>>>>> 0.000 ms
>>>>> 0/    0 (nan%)
>>>>> [  3] -1188645121.2--1188645120.2 sec  0.00 Bytes  0.00 bits/sec
>>>>> 0.000 ms
>>>>> 0/    0 (nan%)
>>>>> [  3] -1188645120.2--1188645119.2 sec  0.00 Bytes  0.00 bits/sec
>>>>> 0.000 ms
>>>>> 0/    0 (nan%)
>>>>> [  3] -1188645119.2--1188645118.2 sec  0.00 Bytes  0.00 bits/sec
>>>>> 0.000 ms
>>>>> 0/    0 (nan%)
>>>>>
>>>>> Has anybody had the same experience with Iperf ? Can anybody say
>>>>> me how to
>>>>> fix this problem ?
>>>>>
>>>>> greetings,
>>>>> E.
>>>>>
>>>>>
>>>>> --
>>>>> Olsr-users mailing list
>>>>> (spam-protected)
>>>>> http://lists.olsr.org/mailman/listinfo/olsr-users
>>>>
>>>> -------------------------
>>>> Mehdi Bezahaf,
>>>> PhD Student
>>>>
>>>> University Pierre and Marie Curie
>>>> LIP6/CNRS - Networks & Performance
>>>> Tel.: +331 4427 8775
>>>> Office 705,
>>>> 104 avenue du Président Kennedy
>>>> 75016 Paris
>>>> -------------------------
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Olsr-users mailing list
>>> (spam-protected)
>>> http://lists.olsr.org/mailman/listinfo/olsr-users
>>>
>>
>> -------------------------
>> Mehdi Bezahaf,
>> PhD Student
>>
>> University Pierre and Marie Curie
>> LIP6/CNRS - Networks & Performance
>> Tel.: +331 4427 8775
>> Office 705,
>> 104 avenue du Président Kennedy
>> 75016 Paris
>> -------------------------
>>
>>
>
>
>
> -- 
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>

-------------------------
Mehdi Bezahaf,
PhD Student

University Pierre and Marie Curie
LIP6/CNRS - Networks & Performance
Tel.: +331 4427 8775
Office 705,
104 avenue du Président Kennedy
75016 Paris
-------------------------