[Olsr-users] [B.A.T.M.A.N.] point me to some OSI layer diagramsif possible ?

[Bhat, Ishwara]

I thought 802.11s need not be strictly layer 2. Open source 11s driver
is on top of MAC drivers that comply with mac80211 framework. 

http://open80211s.com/trac

So it can be either layer 2 or 2.5.

Regards,
Ishwar

-----Original Message-----
From: (spam-protected)
[mailto:(spam-protected)] On Behalf Of Marek Lindner
Sent: Thursday, December 10, 2009 9:31 AM
To: (spam-protected)
Cc: olsr list users mailing
Subject: Re: [Olsr-users] [B.A.T.M.A.N.] point me to some OSI layer
diagramsif possible ?

On Thursday 10 December 2009 07:40:53 L. Aaron Kaplan wrote:
> | link, 802.11s, B.A.T.M.A.N  layer 2 version, OLPC's  802.11s|  2
the
> | HWMP and all the 80.211s stuff resides here. 802.11a/b/g/n resides
here.
> | Madwifi, ath5k and ath9k reside here. 

Sorry, but that is not (entirely) correct. It is no problem calling
batman-adv 
a layer 2 protocol for the sake of simplicity (it deals with MAC
addresses 
instead of IP addresses, etc ..). But if you mention batman-adv and 
802.11s/ath5k/etc in the same sentence you have to be more precise as
they do 
not operate on the same layer.

batman-adv is layer 2.5 and runs on top of all ethernet based layer 2 
protocols which means you can run it over wireless 
(managed/adhoc/mesh/whatever mode), plain ethernet cable, VPNs and so
on.

However, 802.11s is "true" layer 2 and as such is limited to the medium 
(wireless) as well as to the hardware & drivers. 


Regards,
Marek

-- 
Olsr-users mailing list
(spam-protected)
http://lists.olsr.org/mailman/listinfo/olsr-users