[Olsr-users] Need to setup the -OLSR-live video- demo with 4-5 Computers

(spam-protected) (spam-protected)
Thu Aug 6 10:50:58 CEST 2009


Thnaks Markus
Actually I need to make the setup using 5-6 Personal Computers only. I
wanted to demonstrate the OLSR using the live video. for example suppose
I have 5 nodes (PC) lets say A, B, C, D, E.
connected in circular fashion A->B->C->D->E->A. I am running the video
from A->C through the relays B  (at any point of time). now for test
lets say the node B is down (drop the entire traffic here only
forcibly). Then immediatly the traffic should be rerouted via E and D
(A->E->D->C).
 If I am not wrong OLSR should take care of this functioning?. and if my
assuption is right, How much time will it take to reroute (for how much
time the video will be off) through E and d if B is down?
 
Can you guide about this if I am not wrong........
 

________________________________

From: (spam-protected)
[mailto:(spam-protected)] On Behalf Of Markus Kittenberger
Sent: Thursday, August 06, 2009 2:09 PM
To: Vijai Kumar (WT01 - Joint CEO Office)
Cc: (spam-protected)
Subject: Re: [Olsr-users] Need to setup the -OLSR-live video- demo with
4-5 Computers


for uninterrupted voip & co u need to use very very short timings, which
in small networks will work, but (at the moment) will not scale in
larger networks,..

Markus

On Thu, Aug 6, 2009 at 6:07 AM, <(spam-protected)> wrote:


	Hi,
	    I need to setup the OLSR demo with 4-5 Pcs connected via
cross cables.
	    I got the release 5 code from the site. Now I will start the
compilation and other configuration.
	  
	Question:
	Can I make the setup using the OLSR to show the live video or
chat in-between the two computers. Actually I have been assigned to make
a demo of OLSR protocol in which we can show the communication (like
live video or chat) and then if one node (Computer basically) is deleted
in the path then the video/chat should not be affected as it should take
another route in this case.
	 
	Can Anybody suggest me how we can do this using OLSR?  Can we
achieve this functionality using the OLSR code standalone or we would
need to integrate OLSR with other application if yes then how?????
	 
	Thanks in Advance
	 
	Vijai Kumar
	Technical Specialist 
	Wipro Technologies.
	(spam-protected)

	Please do not print this email unless it is absolutely
necessary. 

	The information contained in this electronic message and any
attachments to this message are intended for the exclusive use of the
addressee(s) and may contain proprietary, confidential or privileged
information. If you are not the intended recipient, you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately and destroy all copies of this message and any attachments. 

	WARNING: Computer viruses can be transmitted via email. The
recipient should check this email and any attachments for the presence
of viruses. The company accepts no liability for any damage caused by
any virus transmitted by this email. 

	www.wipro.com 


	--
	Olsr-users mailing list
	(spam-protected)
	http://lists.olsr.org/mailman/listinfo/olsr-users
	



Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 

www.wipro.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20090806/d2a1518e/attachment.html>


More information about the Olsr-users mailing list