[Olsr-users] Re : Probleme of network topology discovery

[Patrick]

Yes I know but I use special driver from zydas not the official one from the
kernel.

Only one time everything worked fine. But now nothing work. I am searching
what is different... but for the moment everything are exactly the same...

Thanks for your help

-----Message d'origine-----
De : Patrick [mailto:(spam-protected)] 
Envoyé : mardi, 3. juin 2008 08:21
À : 'Aaron Kaplan'
Objet : RE: Re : [Olsr-users] Probleme of network topology discovery

Yes I know but I use special driver from zydas not the official one from the
kernel.

Only one time everything worked fine. But now nothing work. I am searching
what is different... but for the moment everything are exactly the same...

Thanks for your help

-----Message d'origine-----
De : Aaron Kaplan [mailto:(spam-protected)] 
Envoyé : lundi, 2. juin 2008 19:10
À : PAtrick Gerber
Cc : (spam-protected)
Objet : Re: Re : [Olsr-users] Probleme of network topology discovery


adhoc mode for all nodes.

Please be aware that there often were problems with atheros based  
cards in ad-hoc mode

a.


On Jun 2, 2008, at 6:53 PM, PAtrick Gerber wrote:

> Yes in ad-hoc or in managed mode but without access point.
> I don't know what is the standard with olsr ?
>
> ----- Message d'origine ----
> De : Aaron Kaplan <(spam-protected)>
> À : PAtrick Gerber <(spam-protected)>
> Cc : (spam-protected)
> Envoyé le : Lundi, 2 Juin 2008, 18h31mn 25s
> Objet : Re: [Olsr-users] Probleme of network topology discovery
>
>
> On Jun 2, 2008, at 5:57 PM, PAtrick Gerber wrote:
>
> > Hello all,
> >
> > I use olsr on 3 embedded cards powered by an ARM machine and I
> > would like to create a simple network between this 3 cards.
>
> in adhoc mode?
>
> >
> > Each card is powered by Linux and have a USB wifi stick configured
> > in ad-hoc mode. Each card have a different IP with the same sub-
> > network (192.168.0.1, 192.168.0.2, 192.168.0.3) and all the same
> > SSID and netmask. I can connect to each card from my laptop so I
> > think wifi work well. All the 3 card are in the same area with 1m
> > between each.  My configuration file (based on an example from the
> > source) is the attached one.
> >
> > My problem is when I start olsrd on each card olsr doesn't discover
> > the other cards. Olsrd is running and serching other node but
> > nothing are discovered. Do you have an idea of what could be my
> > probleme ?
> >
> > Thank you in advance for any help.
> >
> > K-pa
> >
> >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > En finir avec le spam? Yahoo! Mail vous offre la meilleure
> > protection possible contre les messages non sollicités
> > http://mail.yahoo.fr Yahoo! Mail
> >
> > __________________________________________________
> > Do You Yahoo!?
> > En finir avec le spam? Yahoo! Mail vous offre la meilleure
> > protection possible contre les messages non sollicités
> > http://mail.yahoo.fr Yahoo! Mail <olsrd.conf>
> > --
> > Olsr-users mailing list
> > (spam-protected)
> > http://lists.olsr.org/mailman/listinfo/olsr-users
>
> ---
> there's no place like 127.0.0.1
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> En finir avec le spam? Yahoo! Mail vous offre la meilleure  
> protection possible contre les messages non sollicités
> http://mail.yahoo.fr Yahoo! Mail

---
there's no place like 127.0.0.1