[Olsr-users] Multi-card Nodes

[Kaplan L. Aaron]

On Jul 30, 2008, at 8:36 PM, Benjamin Henrion wrote:

> On Wed, Jul 30, 2008 at 8:31 PM, Bernd Petrovitsch  
> <(spam-protected)> wrote:
>>
>> On Wed, 2008-07-30 at 19:13 +0100, Derek C wrote:
>>> Hi,
>>>
>>> Is it possible to setup OLSRd with two backbone network cards?
>>
>> Of course - as many as you want (or more as the hardware supports).
>>
>>> I am hoping to make nodes with three radio cards - two at 5Ghz  
>>> and one
>>> 2Ghz card for customer access.
>>>
>>> I have been playing around with openwrt on gateworks boards (4  
>>> miniPCI
>>> slots) and three radio cards.  In my testing I've only been using  
>>> typical
>>
>> You can run OLSRD over all network interfaces - the WLAN  
>> interfaces in
>> ad-hoc node  and ethernet and openvpn's tap interfaces.
>
> I suspect that OLSR will continue to route packets over the same 5ghz
> interface, not switching from one 5ghz to another 5ghz channel on each
> hop.

If you want you can give it hints.
Later metrics (MIC) should solve that.

a.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2312 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20080730/dadbd4ed/attachment.bin>