[Olsr-users] problem with asymmetric link

Klaus Darilion (spam-protected)
Mon Jul 14 13:22:44 CEST 2008



Henning Rogge schrieb:
> On Fri, Jul 11, 2008 at 17:55, Klaus Darilion
> <(spam-protected)> wrote:
>> Hi!
>>
>> I want to simulate an ad-hoc net in my LAN. Therefore I have set up 3
>> VWware linux boxes on my PC with olsrd 0.5.6-rc7 and did some tests.
>> Now I start olsrd on all 3 boxes. I would think that A should find a
>> route to C via B, and C should find a route to A directly. But this is
>> not the case.
>> A only finds links between A and B, and from B to C.
>> B finds links between A and B, and B and C.
>> C finds links between A and B, and B and C.
>>
>> Why does C not find the link from C to A?
>> Why does A not find the link from C to A?
>> Why does A not find the link from C to B?
>>
>> Is this the intended behavior? Below is the debug output.
> OLSR only use symmetric links for routing.

Hi Henning!

Thenks for your answer. This explains the first two questions. But why 
does A not find the link from C to B?

thanks
klaus


> 
> It would be bad to send unicast traffic over asymmetric links because
> 802.11 use an acknowledgement signal for unicast traffic, which would
> not reach the receiver...
> 
> Henning
> 




More information about the Olsr-users mailing list