[Olsr-users] the problem of setting olsrd.conf

[Bhat, Ishwara]

Hi,

 

Are you able to assign this IP from command line ( irrespective of OLSR) ? 

 

I never used IPv6. But on IP v4 with one laptop I faced the issue. It was a driver issue and upon upgrade it worked ok.

 

Regards

Ishwar

________________________________

From: (spam-protected) [mailto:(spam-protected)] On Behalf Of guoyuehua.cool
Sent: Tuesday, December 30, 2008 12:25 PM
To: olsr-users
Subject: [Olsr-users] the problem of setting olsrd.conf

 


hi guys:)

        Now i want to use olsrd in ipv6 mode, I use the global ipv6 address in my wireless card. After set mode and essid, run the command line "olsrd -i wlan0 -ipv6",but the result is as follows
   
        ---- Interface configuration ----

Checking wlan0:
        Wireless interface detected
        Address: 3ffe:0:0:3::2
        Multicast: ff0e::1
        Metric: 1
        MTU - IPhdr: 1438
        Index 2
        Address: 3ffe:0:0:3::2
        Multicast: ff0e::1
Join multicast send: Address already in use
Using 'etx_fpm' algorithm for lq calculation.
-- ALL PLUGINS LOADED! --

Main address: ::
Scheduler started - polling every 0.05 seconds
sendto(v6): Cannot assign requested address
Socket: 6 interface: 2
To: ff0e::1 (size: 28)
Outputsize: 32

        I am wondering if i must add the settings in the olsrd.conf for solve it?
        I really donot know how to solve this problem.anybody know how to solve it? best wishes





________________________________

[广告] 重奖 悬赏kfc3v3 球衣 <http://popme.163.com/link/004584_1120_7027.html>  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20081230/6e5b7334/attachment.html>