[Olsr-users] Insert routes into multiple tables

[Sven-Ola Tuecke]

Hey,

seems to be a typical scenario recently: the catch-all-routing conficts with 
some auto-management and/or with unmached/not-though-out requirements. He 
may use the RtTableDefault to get olsrd's default routing entries out of the 
way.

// Sven-Ola

"Bernd Petrovitsch" <(spam-protected)> schrieb im Newsbeitrag 
news:(spam-protected)
> On Tue, 2008-12-02 at 18:37 -0800, List Receiver wrote:
>> I have a bit of a quandry on my hands.  I have an OLSR router that has
>> two Internet connections.  I'm using Shorewall and it's multi-ISP
>> capabilities to maintain two routing tables for the networks that are
>> behind the router.  When routes/links change state, OLSR properly
>> updates the main routing table, but since Shorewall is tagging packets
>> statically for one of the two tables per ISP, traffic can be routed
>> over dead links.
>>
>> I saw the howto on olsr.org about putting everything in a different
>> routing table, but is it possible to put or update routes in
>> *multiple* routing tables instead?  I need the same routes updated in
>
> No.
>
>>  multiple tables simultaneously.
>
> Are you sure that adding appropriate `ip rule` lines doesn't help?
>
> Apart from that (and on the strategic level): I don't understand how
> your setup is supposed to work in the first place?
> I doubt that your provider speaks OLSR (with you). So who/where are the
> other hosts from the "OLSR network"?
>
> Bernd
> -- 
> Firmix Software GmbH                   http://www.firmix.at/
> mobil: +43 664 4416156                 fax: +43 1 7890849-55
>          Embedded Linux Development and Services
>
>
>
> -- 
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users