[OLSR-users] Anyone tried two nodes with internet connection?
Rajesh Narayanan
(spam-protected)
Wed Jan 10 01:46:29 CET 2007
Hi,
* * * *
| | | |
InternetA--------->Node1 <-(OLSR)-> Node2---------->InternetB
^ ^
| |
| |
Wired link laptop A Wired link laptop B
(HNA4) (HNA4)
I got the dyn gw plugin up and running and configured as suggested. Well the
problem is that :
* Assume I remove the link the InternetA (cable disconnect to simulate link
failure)
* Node 2 gets notified that a route does not exist to the internet anymore
* But the Route to internetA still remains in Node 1!!!
* Node1 tries to route the pings (to google.com) via this interface since
its the default route
* As the default route does not get removed (due to link failure) the OLSR
link is not chosen.
* If I manually remove the default route, only then the Node1 forwards the
pings via Node2 and out.
What am I doing wrong? Any other config issues I need to look at??
Thanks,
Rajesh
>
> Rajesh Narayanan schrieb:
> > Hi,
> >
> > I tried this configuration with the OpenWrt (whiterussian RC4) on a
> > linksys wrt54G routers. This is not going to work with the OLSR that is
> > distributed with that package. Even if the WAN link is down, it gets
> > broadcasted and the route exists in the route table.
> >
> > Suggested fix:
> > If the route exists then check if the link is up before adding it.
> > If not then do not add it till the link becomes up.
> > If the link goes down, then remove the route from the route table.
> >
> > Can anyone look at this with the whiterussian olsr distros?
> >
>
> use the dynamic gateway plugin.
>
> > Thanks,
> > Rajesh.
> >
>
> Alex
>
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20070109/050890cd/attachment.html>
More information about the Olsr-users
mailing list