[Olsr-users] RADVD compatibility with OLSR?

[k k]

Hi,
 
I'm currently using FC5-2.6.16 and i'm trying to implement radvd-1.0-1 together with olsrd-0.5.3. I have 3 PCs: PC1, PC2 and PC3 are connected via wireless cards with PC1 acting as an ap, while PC2 and PC3 are in managed mode. Both radvd and OLSR works fine independently. However when i implement them both, PC2 and PC3 were not able to recieve an IPv6 address automatically from the radvd protocol.
 
Can someone help with with this problem?
 
KiaN
 
PC1: 2001:106:2700::1/64
PC2: 2001:106:2700::2/64
PC3: 2001:106:2700::3/64
 
radvd config on PC1:
#################################################################################
interface ath0
{
        AdvSendAdvert on;
        MinRtrAdvInterval 3;
        MaxRtrAdvInterval 10;
        AdvIntervalOpt off;
        AdvHomeAgentFlag on;
        AdvHomeAgentInfo on;
 
        prefix 2001:106:2700::1/64
        {
                AdvOnLink on;
                AdvAutonomous on;
                AdvRouterAddr on;
        };
};
 
#################################################################################
 
 
 
on PC, PC2 and PC3, the olsr config is:
##################################################################################
DebugLevel	1
 
IpVersion	6
 
ClearScreen     yes
 
Hna4
{
}
 
 
Hna6
{
}
 
AllowNoInt	no
 
 
IpcConnect
{
     MaxConnections  0
     Host            127.0.0.1
}
 
 
UseHysteresis	no
 
HystScaling	0.50
HystThrHigh	0.80
HystThrLow	0.30
 
Pollrate	0.05
 
 
Interface "ath0"
{
 
    Ip6AddrType		global
 
    Ip6MulticastGlobal	ff08::1
        
    HelloInterval    2.0
}
#####################################################################################
_________________________________________________________________
Help Splitzo Sally Before It’s Too Late! 
http://www.thegirlwhosplitinto5.com/