[OLSR-users] Freifunk-Firmware 1.0

Sven-Ola Tuecke (spam-protected)
Tue May 24 10:58:31 CEST 2005


you may need to RTFM on http://openwrt.org/ . In contrast to openwrt the FFF 
will insist on boot_wait=on (first action in /etc/preinit). It's really not 
too easy to brick that device and you always have the Failsafe mode (Press 
reset key 1-2 secs after poweron, release if DMZ flashes irregulary, telnet

If nothing works: Attach serial cable (115kbaud) or Attach JTAG cable (need 
jtag-software "hairydaymed" to zero nvram) or do the "Short pins trick" (in 
that order).

Rgds, Sven-Ola

"Andrew Hodel" <(spam-protected)> schrieb im Newsbeitrag 
>A bit OT but...
> Does ff1.1 set boot_wait after install, seems no?
> I am locked out (wrt54g) except for the wan port which is blocked by
> iptables :)
> Andrew
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users 

More information about the Olsr-users mailing list