[OLSR-users] Help!

[Andreas Tønnesen]

Is UDP port 698 open in your firewall?

- Andreas	

Marco Kramer wrote:
> Hello!!
> 
> I have problems with olsrd between Linux-Nodes. No connection between 
> the nodes!!
> 
> 
> cu Marco
> 
> 
> ------------------------------------------------------------------------
> 
> linux:~ # olsrd -d 9
> 
>  *** olsr.org - 0.4.8 ***
>  Build date: Jan 28 2005
>  http://www.olsr.org
> 
> Parsing file: "/etc/olsrd.conf"
>  *** olsrd configuration ***
> Debug Level      : 9
> IpVersion        : 4
> No interfaces    : ALLOWED
> TOS              : 0x10
> Willingness      : AUTO
> IPC connections  : 2
>         Host 10.0.0.1
>         Net 10.0.0.0/255.255.255.0
> Pollrate         : 0.05
> TC redundancy    : 0
> MPR coverage     : 1
> LQ level         : 0
> LQ window size   : 10
> Clear screen     : no
> Interfaces:
>  dev: "eth1"
>         IPv4 broadcast           : 10.0.0.255
>         IPv6 addrtype            : site-local
>         IPv6 multicast site/glbl : ff05::11/ff0e::1
>         HELLO emission/validity  : 2.00/6.00
>         TC emission/validity     : 5.00/15.00
>         MID emission/validity    : 5.00/15.00
>         HNA emission/validity    : 5.00/15.00
> Using hysteresis:
>         Scaling      : 0.50
>         Thr high/low : 0.80/0.30
> HNA4 entries:
>         10.0.0.0/255.255.255.0
> Initializing parser...
> Parser: registering event for type 1
> Register parse function: Added function for type 1
> Parser: registering event for type 2
> Register parse function: Added function for type 2
> Parser: registering event for type 3
> Register parse function: Added function for type 3
> Parser: registering event for type 4
> Register parse function: Added function for type 4
> Scheduler event registered int: 20.00
> Initializing APM
> APM info:
>         AC status -1073745048
>         Battery percentage 134545834%
> 
> Could not read APM info - setting default willingness(3)
> Using IP version 4
> 
>  ---- Interface configuration ----
> 
> Checking eth1:
>         Wireless interface detected
>         MTU: 1500
>         Index 134679824
>         Address:10.0.0.1
>         Netmask:255.255.255.0
>         Broadcast address:10.0.0.255
> Binding socket 4 to device eth1
> Adding OLSR socket entry 4
> New main address: 10.0.0.1
> Scheduler event registered int: 2.00
> Scheduler event registered int: 5.00
> Scheduler event registered int: 5.00
> Scheduler event registered int: 5.00
> Scheduler event registered int: 5.00
> Scheduler event registered int: 0.60
> Parser: registering event for type -1
> Register parse function: Added function for type -1
> Adding OLSR socket entry 6
> Initializing duplicatetable - hashsize 32
> Scheduler event registered int: 2.00
> TC: init topo
> MPRS: Init
> MID: init
> Scheduler event registered int: 1.00
> Scheduler event registered int: 1.00
> Loading plugins...
> 
> Main address: 10.0.0.1
> 
> Scheduler started - polling every 0.05 seconds
> Max jitter is 0.500000
> 
> |       Building HELLO on interface 0
> /       Building HELLO on interface 0
> -       Building HELLO on interface 0
> Received signal 2 - shutting down
> Deleting all routes...
> HNA list:
> Route list:
> Closing sockets...
> Shutting down IPC...
> Closing plugins...
> Restoring network state
> 
>  <<<< olsr.org - 0.4.8 - terminating >>>>
>            http://www.olsr.org
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users

-- 
Andreas Tønnesen
http://www.olsr.org