[OLSR-users] Running two insances of olsr

[Michael Bauer]

hi

I started from an incomplete config file. Got a complete one now (i
hope)

as you foretold i ran into problems:

eth2:
        Flags: 00401043
        Wireless interface detected
        Address:192.168.10.2
        Netmask:255.255.255.0
        Broadcast address:192.168.10.255
Disabling IP spoof filtering by writing "0" to the
/proc/sys/net/ipv4/conf/eth2/rp_filter file
This file will be restored to its original state at exit
Disabling IP spoof filtering by writing "0" to the
/proc/sys/net/ipv4/conf/eth2/send_redirects file
This file will be restored to its original state at exit
        Interface eth2 set up for use with index 0


Determening IP addresses and initializing sockets:
        interface eth2...192.168.10.2
bind: Address already in use
Could not initialize socet... exiting!

at the moment i'm glimpsing into the sourcecode hoping i can find a
solution for useing uolsrd in both ipv4 and ipv6.

greetings mihi
-- 
a place without wlan just doesn't feel like home
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20040620/cc29a342/attachment.sig>