[OLSR-users] Bug/feature?: hosts of the same LAN in the routing table

[Jens Nachtigall]

Hi,

my routing table on one of my wrts looks like this:

(spam-protected):~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
1# 10.200.201.1    0.0.0.0         255.255.255.255 UH    1      0        0 vlan2
2# 10.200.200.2    0.0.0.0         255.255.255.255 UH    1      0        0 vlan2
3# 10.200.200.1    0.0.0.0         255.255.255.255 UH    1      0        0 vlan2
4# 192.168.2.0     10.200.200.1    255.255.255.0   UG    1      0        0 vlan2
5# 10.200.201.0    10.200.201.1    255.255.255.0   UG    1      0        0 vlan2
6# 10.200.200.0    0.0.0.0         255.255.255.0   U     0      0        0 vlan2
7# 10.200.202.0    0.0.0.0         255.255.255.0   U     0      0        0 eth2
7# 0.0.0.0         10.200.200.1    0.0.0.0         UG    1      0        0 vlan2



#1 is on LAN #5
#2 and #3 are on LAN #6

Is there any need to include host addresses #1, #2 and #3 in the
routing table, since they are directly reachable through the LAN?


Jens