[Olsr-dev] olsr1 / problem: etx_ffeth + LinkQualityMult

Ufo (spam-protected)
Fri May 12 18:01:49 CEST 2017


so basti, could you do that bisectioning?

or is there already a possibility or script to compile all 
olsr-versions/commits between 0.9.0.3 and 0.9.5?
for LEDE it would be nice to have it for one of the releases, either for 
17.01.0 or 17.01.1, (for ath9k or x86) via SDK?

thanks

On 11.05.2017 15:28, Ferry Huberts wrote:
> Ok guys
>
> We now at least have a range.
> Can either of you please bisect to the commit that broke this?
> Thanks
>
>
> On 11/05/17 15:16, Ufo wrote:
>> even with etx_ff that LinkQualityMult doesnt work anymore.
>> (not for Interface, not for InterfaceDefault, nor for any or for 
>> single hosts)
>>
>> we are using Freifunk with LEDE 17.01.0 and LEDE 17.01.1, there is a 
>> olsrd v.0.9.5 inside.
>> older firmwares with olsr v.0.9.0 or v.0.9.0.3 are working fine with 
>> LinkQualityMult
>>
>> i was looking in config-files and /tmp/etc/olsrd.conf but cant find 
>> any difference in these files between versions.
>>
>>
>> On 11.05.2017 11:52, Bastian Bittorf wrote:
>>> Battlemesh is near, and i do some testing with v1:
>>> (not only with olsrd2)
>>>
>>> I try to use LinkQualityMult together with metric: etx_ffeth
>>> I seems not to work anymore (but IMHO did in the past)
>>>
>>> these both variants i tried:
>>> LinkQualityMult default 0.8
>>> LinkQualityMult 10.10.5.1 0.8
>>> (where 10.10.5.1 is the IP of the neigh)
>>>
>>>
>>> Any idea about that?
>>>
>>> see the last section with 'wlan0'
>>> here the generated config:
>>>
>>> DebugLevel 0
>>> AllowNoInt yes
>>> ClearScreen no
>>> IpVersion 4
>>> FIBMetric "flat"
>>> Willingness 7
>>> TcRedundancy 2
>>> LinkQualityFishEye 1
>>> LinkQualityAlgorithm "etx_ffeth"
>>> MprCoverage 7
>>> MainIp 10.10.7.1
>>>
>>> Hna4
>>> {
>>>                  10.10.7.0 255.255.255.0
>>> }
>>>
>>> LoadPlugin "olsrd_txtinfo.so.0.1"
>>> {
>>>          PlParam "accept" "0.0.0.0"
>>>          PlParam "port" "2006"
>>> }
>>>
>>> LoadPlugin "olsrd_nameservice.so.0.3"
>>> {
>>>          PlParam "name" "E1-kammer-mesh2"
>>> }
>>>
>>> Interface "eth0.1"
>>> {
>>>          Ip4Broadcast 255.255.255.255
>>>          Mode "ether"
>>>          HelloInterval 4.0
>>>          HelloValidityTime 150.0
>>>          TcInterval 3.0
>>>          TcValidityTime 600.0
>>>          MidInterval 30.0
>>>          MidValidityTime 600.0
>>>          HnaInterval 12.0
>>>          HnaValidityTime 150.0
>>> }
>>>
>>> Interface "eth0.2"
>>> {
>>>          Ip4Broadcast 255.255.255.255
>>>          Mode "ether"
>>>          HelloInterval 4.0
>>>          HelloValidityTime 150.0
>>>          TcInterval 3.0
>>>          TcValidityTime 600.0
>>>          MidInterval 30.0
>>>          MidValidityTime 600.0
>>>          HnaInterval 12.0
>>>          HnaValidityTime 150.0
>>> }
>>>
>>> Interface "wlan0"
>>> {
>>>          LinkQualityMult default 0.8
>>>          Ip4Broadcast 255.255.255.255
>>>          Mode "mesh"
>>>          HelloInterval 4.0
>>>          HelloValidityTime 150.0
>>>          TcInterval 3.0
>>>          TcValidityTime 600.0
>>>          MidInterval 30.0
>>>          MidValidityTime 600.0
>>>          HnaInterval 12.0
>>>          HnaValidityTime 150.0
>>> }
>>>
>>
>>
>




More information about the Olsr-dev mailing list