[Olsr-dev] porting PUD plugin to OLSRDv2

[KRIEK Arnoud]

I am currently working on porting the PUD plugin to OLSRDv2. However, there are still some things unclear to me about the PUD plugin.


1.       Are all nodes aware of each others GPS position via PUD or just their own?

2.       If smart gateway is enabled, do all the nodes send their Position update messages to the cluster leader?

The entire network needs to constantly update it's GPS position for each node. I would like to avoid having each node uplinking individually and be able to access all the GPS information via any connected node to the LTE server (so basically access the first node you find with the server and immediately receive all GPS info from the entire OLSR network via that node at any given time).

Thanks in advance!


------------------------------------------------------------------------------------------------------------
Disclaimer:

If you are not the intended recipient of this email, please notify the sender and
delete it.
Any unauthorized copying, disclosure or distribution of this email or its
attachment(s) is forbidden.
Thales Nederland BV will not accept liability for any damage caused by this email or
its attachment(s).
Thales Nederland BV is seated in Hengelo and is registered at the Chamber of
Commerce under number 06061578.
------------------------------------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20150904/8d7a3bdc/attachment.html>