[Olsr-dev] Missing routes and unexpected routes reg.

[Henning Rogge]

Hi,

just to make sure, you can see all four nodes producing TC messages?

Maybe I have to replicate this setup when I am back at work on
Tuesday, I have no clue what is going on.

Henning

On Fri, Jun 6, 2014 at 2:38 PM, Vigneswaran R <(spam-protected)> wrote:
> On 06/06/2014 02:58 PM, Vigneswaran R wrote:
>
> On 06/06/2014 02:23 PM, Vigneswaran R wrote:
>
> On 06/06/2014 01:01 PM, Henning Rogge wrote:
>
> On Fri, Jun 6, 2014 at 9:39 AM, Bastian Bittorf <(spam-protected)>
> wrote:
>
> * Vigneswaran R <(spam-protected)> [06.06.2014 09:37]:
>
> Could you please help in debugging these problems? Thanks.
>
> can you show is you commandline or config? bye, bastian
>
> The output of "ip addr" on every node would also help.
>
>
> Command Line:
>
>     ./olsrd2 -l olsrd2.conf
>
> Configuration file contents:
>
> [interface=eth0]
> [interface=eth1]
>
> Exception: On R1, only eth1 included.
>
> IP Addr: (pfa the complete output)
>
> R1: eth0: 1.0.0.2/24 (non-olsr), eth1: 10.1.1.1/32
> R2: eth0: 10.1.2.1/32, eth1: 10.1.2.2/32
> R3: eth0: 10.1.3.1/32, eth1: 10.1.3.2/32
> R4: eth0: 10.1.4.1/32, eth1: 10.1.4.2/32
>
> (I am using /32 mask for testing. However, I got the same problem with /8
> mask also).
>
> Please let me know if any other information is required.
>
>
> PFA the output of the following command on all the nodes. Please see whether
> this helps.
>
> echo "nhdp neighlink" | nc 127.0.0.1 2009
>
>
> Restarted olsrd2 with debug=all and observed the following from the
> collected logs,
>
> 1. R1 received TC messages originated from R2 (10.1.2.1) only.
>   -- Shouldn't it get TC from 10.1.3.1 also? I think, this is the reason why
> R1 is not getting route for R4.
>
> 2. R2 received TC messages originated from R3 (10.1.3.1) only.
>   -- I think, this is fine for the 4 nodes topology.
>
> 3. R3 received TC messages originated from R2 (10.1.2.1) only.
>   -- this is also fine for the same reason.
>
> 4. R4 received TC messages originated from both R2 (10.1.2.1) and R3
> (10.1.3.1).
>
> If you want me to post specific portions of the log files, please suggest.
>
> Regards,
> Vignesh
>
>
>
> Regards,
> Vignesh
>
>
>
>
> --
> Olsr-dev mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-dev