[Olsr-dev] OLSRv2 Segfault

[Vigneswaran R]

On 01/23/2014 03:49 PM, Henning Rogge wrote:
> Hi,
>
> it took a while but I think I found the bug that created your segfault
> and fixed it properly. I removed your hotfix and added a testcase for
> the message that crashed the RFC5444 address compressor.
>
> (I also found a few places where I can still improve the compressor,
> but I will do this later)
>
> Can you maybe verify that the new commit also works for you?

Yes, it is working for me. I haven't got any segfault till now. However, 
I am not sure how to use the test cases to validate olsrd2. If I run 
test_nhdp_2, it says "10 tests ended: 10 successes, 0 fails" regardless 
of whether olsrd2 is running or not.

Attached the logs produced by both the new code (olsrd2_success.log) and 
the old code which gave segfault (olsrd2_failure.log). Thanks.

Regards,
Vignesh
>
> Henning Rogge
>
> On Tue, Jan 21, 2014 at 12:50 PM, Vigneswaran R <(spam-protected)> wrote:
>> On 01/21/2014 05:13 PM, Henning Rogge wrote:
>>> On Tue, Jan 21, 2014 at 12:18 PM, Vigneswaran R <(spam-protected)>
>>> wrote:
>>>> PFA the log. I used the following command to start olsrd2 (after applying
>>>> the patch and compiling).
>>>>
>>>>       ./olsrd2 --set interface[eth0].bindto=10.0.0.0/8 --set
>>>> interface[eth1].bindto=10.0.0.0/8 --set interface[eth2].bindto=10.0.0.0/8
>>>> --set log.debug=nhdp_w 2> olsrd2.log
>>> Good.
>>>
>>> At the end of the logfile the segfault happens, right?
>>
>> Yes.
>>
>>
>>>> If the debug level needs to be increased, please suggest the suitable
>>>> value.
>>> The "loglevel" is just a legacy part that will most likely be removed
>>> soon. Its just a quick way to set log.debug and log.info.
>>
>> Ok.
>>
>> vignesh

-------------- next part --------------
A non-text attachment was scrubbed...
Name: olsrd2_success.log
Type: text/x-log
Size: 131762 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20140123/9774123f/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: olsrd2_failure.log
Type: text/x-log
Size: 30483 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20140123/9774123f/attachment-0001.bin>