[Olsr-dev] OLSRv2 release version 0.3.0

Syed Salman Haider Rizvi (spam-protected)
Tue Sep 24 11:48:04 CEST 2013

Hi All ,                 Sorry there was some mistake in network file now i m able to ping and communicate directly with or without daemon . After running the olsrd2 daemon i m still getting this error 
 01:07:29.867 WARN(os_net) /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c 111: Cannot open ipv6 ioctl socket: Address family not supported by protocol (124)01:07:29.873 WARN(os_net) /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c 400: Error, cannot open proc entry /proc/sys/net/ipv6/conf/all/forwarding: No such file or directory (2)01:07:29.874 WARN(os_net) /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c 336: WARNING! Could not activate ip_forward for ipv6! You should manually ensure that ip_forward for ipv6 is activated!01:07:29.876 WARN(stream) /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_generic/os_net_generic_getsocket.c 70: Cannot open socket: Address family not supported by protocol (124)
Henning told me about getting ETT values by using telnet but i m not able to get into it . Can you please explain how can i really see the values . Also i will go to my lab tomorrow and test it on more then two hops . 
When you are going to make a start up script so i can create a large testbed 
Here is my arp table after running the daemon . 

(spam-protected):~# route -nKernel IP routing tableDestination     Gateway         Genmask         Flags Metric Ref    Use Iface10.0.1.9 UGH   2      0        0 wlan010.0.1.8 UGH   2      0        0 wlan0192.168.5.0   U     0      0        0 lan410.0.1.0   U     0      0        0 wlan010.2.1.0   U     0      0        0 lan210.3.1.0   U     0      0        0 lan310.1.1.0   U     0      0        0 lan10.0.0.0         UG    0      0        0 lan4

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20130924/d0e6896e/attachment.html>

More information about the Olsr-dev mailing list