[Olsr-dev] OLSRv2 release version 0.3.0

[Henning Rogge]

On 09/23/2013 03:16 PM, Syed Salman Haider Rizvi wrote:
> 
>> So "iwconfig wlan0" output looks fine AND you see your neighbor in the
>> output of "iw wlan0 station dump" ?
> 
> Here you can see that ...
> 
> (spam-protected):~# iwconfig wlan0
> wlan0     IEEE 802.11bgn  ESSID:"OpenWrt"
>           Mode:Ad-Hoc  Frequency:2.462 GHz  Cell: D6:8F:DE:97:55:A1
>           Tx-Power=23 dBm
>           RTS thr:off   Fragment thr:off
>           Encryption key:off
>           Power Management:on
> 
> (spam-protected):~# iw wlan0 station dump
> Station 90:f6:52:63:b0:1a (on wlan0)
>         inactive time:  440 ms
>         rx bytes:       43736
>         rx packets:     1136
>         tx bytes:       0
>         tx packets:     0
>         tx retries:     0
>         tx failed:      0
>         signal:         -53 dBm
>         signal avg:     -53 dBm
>         tx bitrate:     1.0 MBit/s
>         rx bitrate:     1.0 MBit/s

That is good news, because your system seems to be connected on
linklayer level.

*sigh*

I assume you have configured the new IP addresses (different ones) on
both wlan0 interfaces.

one of them (according to an earlier mail) was 10.0.1.9/24.

What is the output of the ping on the other side? Maybe tcpdump running
on both sides could help you to debug the problem.

Henning Rogge

-- 
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6169 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20130923/c88f5f05/attachment.bin>