[Olsr-dev] OLSRv2 release version 0.3.0

[Syed Salman Haider Rizvi]

For olsrd2 i m just using wlan0 and lan4 which have different IPs for lan1 lan2 lan3 i have the same ip like for wlan0 if you want i can change it but i dont think it will make any changes in OLSRd 
(spam-protected):~# route -nKernel IP routing tableDestination     Gateway         Genmask         Flags Metric Ref    Use Iface192.168.5.0     0.0.0.0         255.255.255.0   U     0      0        0 lan410.0.1.0        0.0.0.0         255.255.255.0   U     0      0        0 lan110.0.1.0        0.0.0.0         255.255.255.0   U     0      0        0 lan210.0.1.0        0.0.0.0         255.255.255.0   U     0      0        0 lan310.0.1.0        0.0.0.0         255.255.255.0   U     0      0        0 wlan00.0.0.0         192.168.5.9     0.0.0.0         UG    0      0        0 lan4


ifconfig
eth0      Link encap:Ethernet  HWaddr 90:F6:52:63:B0:1A          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:1083 errors:0 dropped:0 overruns:0 frame:0          TX packets:88 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:1000          RX bytes:268869 (262.5 KiB)  TX bytes:13653 (13.3 KiB)          Interrupt:4
lan1      Link encap:Ethernet  HWaddr 90:F6:52:63:B0:1A          inet addr:10.0.1.9  Bcast:10.0.1.255  Mask:255.255.255.0          UP BROADCAST MULTICAST  MTU:1500  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
lan2      Link encap:Ethernet  HWaddr 90:F6:52:63:B0:1A          inet addr:10.0.1.9  Bcast:10.0.1.255  Mask:255.255.255.0          UP BROADCAST MULTICAST  MTU:1500  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
lan3      Link encap:Ethernet  HWaddr 90:F6:52:63:B0:1A          inet addr:10.0.1.9  Bcast:10.0.1.255  Mask:255.255.255.0          UP BROADCAST MULTICAST  MTU:1500  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
lan4      Link encap:Ethernet  HWaddr 90:F6:52:63:B0:1A          inet addr:192.168.5.3  Bcast:192.168.5.255  Mask:255.255.255.0          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:1083 errors:0 dropped:0 overruns:0 frame:0          TX packets:88 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:249375 (243.5 KiB)  TX bytes:12977 (12.6 KiB)
lo        Link encap:Local Loopback          inet addr:127.0.0.1  Mask:255.0.0.0          UP LOOPBACK RUNNING  MTU:16436  Metric:1          RX packets:512 errors:0 dropped:0 overruns:0 frame:0          TX packets:512 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:35840 (35.0 KiB)  TX bytes:35840 (35.0 KiB)
wan       Link encap:Ethernet  HWaddr 90:F6:52:63:B0:1A          UP BROADCAST MULTICAST  MTU:1500  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
wlan0     Link encap:Ethernet  HWaddr 90:F6:52:63:B0:1A          inet addr:10.0.1.9  Bcast:10.0.1.255  Mask:255.255.255.0          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:32          RX bytes:0 (0.0 B)  TX bytes:510 (510.0 B)
Thanks
Salman

> Date: Mon, 23 Sep 2013 10:52:01 +0200
> From: (spam-protected)
> To: (spam-protected)
> CC: (spam-protected)
> Subject: Re: [Olsr-dev] OLSRv2 release version 0.3.0
> 
> On 09/23/2013 10:46 AM, Syed Salman Haider Rizvi wrote:
> > Hey,
> >    I think olsrd2 are not communicating because i m unable to find the
> > route to other node also pinging is not working (right now i m testing
> > with 2 routers) 
> 
> Wait, you cannot ping between neighbor nodes? That should work with or
> without OLSRd.
> 
> Can you have a look at this document? It describes some based debugging
> of a mesh before you start with the routing protocol:
> 
> http://www.olsr.org/mediawiki/index.php/First_Mesh_Troubleshooting
> 
> I also looked through your OpenWRT configuration again... are you using
> the same IPv4 address and netmask for lan1/2/3 and wlan0 ?
> 
> Can you post the complete output of "ifconfig" and "route -n" here?
> 
> Henning Rogge
> 
> 
> -- 
> Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
> Kommunikation, Informationsverarbeitung und Ergonomie FKIE
> Kommunikationssysteme (KOM)
> Fraunhofer Straße 20, 53343 Wachtberg, Germany
> Telefon +49 228 9435-961,   Fax +49 228 9435 685
> mailto:(spam-protected) http://www.fkie.fraunhofer.de
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20130923/b3a4507e/attachment.html>