[Olsr-dev] OLSRv2 release version 0.3.0

[Henning Rogge]

On 09/19/2013 02:09 PM, Syed Salman Haider Rizvi wrote:
> So you are saying with this daemon i will not able to use ETX just ETT
> and i don't any special lines in etc/olsrd.conf to run ETT ?
> Just changing linkqualitylevel 2 will work ETT ?

You don't even need a configuration file (the old one will NOT work!).

See http://www.olsr.org/mediawiki/index.php/Run_OLSRd2

Just set your "main IP" to the loopback interface and use linklocal IPs
on the mesh interfaces. Or just set NO IPs on the mesh interfaces,
OLSRd2 will generate IPv4 linklocal IPs automatically.

Henning Rogge




-- 
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6169 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20130919/1deca543/attachment.bin>