[Olsr-dev] OLSRv2 release version 0.3.0

[Henning Rogge]

On 09/19/2013 01:47 PM, Syed Salman Haider Rizvi wrote:
> yes by just selecting OLSR its working fine but when i select ett and
> rest of the plugins from the menu it doesn't compile the plugins but
> daemon is still working

I admit its a bit confusing at the moment, I didn't spend that much time
with the OpenWRT makefile and I am still undecided if OpenWRT should go
for dynamic OONF libraries (which can have bugfixes on their own and can
be shared with other programs) or should go for the "static linked olsrd2".

> IF olsr daemon is working fine than also let me know how can i use ETT
> and ETX and see its values?

OLSRd2 opens a telnet port (2006) where all plugins (and some parts of
the core) register their commands.

run the "help" command to get an overview about the commands... you are
most likely interested in the "nhdp" and the "olsrv2" command.

Both commands are mostly for human debugging purpose at the moment and
will be replaced by some txtinfo style plugin with text/json output later.

the ONLY metric that is supported by OLSRd2 at the moment is ETT.

*****

Memo to myself, I have to write a wiki page about the OLSRd2 telnet
interface.

Henning Rogge

-- 
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6169 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20130919/8263c1c7/attachment.bin>