[Olsr-dev] OLSR2 Unable to communicate from laptop/pc
Syed Salman Haider Rizvi
Thu Oct 17 13:40:38 CEST 2013
> 1) Use an address prefix between 169.254.1.1/16 and 169.254.254.254/16
> for each of the interfaces you want to talk OLSRv2 on.
> 2) Use a different address range (e.g. 10.0.0.x) on the loopback interface.
> 3) Don't worry for computers/interfaces without OLSRv2 on them at the
> 3) Start OLSRv2 with each of the "mesh" interfaces as a parameter.
After following your instructions i can see the routes of 10.0.0.1 but my both workstations still cannot ping each other also i tried
olsrd2 wlan0 lo lan4
lan4 interface is working fine but still its gateway (workstation ) is not reachable
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Olsr-dev