[Olsr-dev] Olsrd 0.6.5.2 is freezing at start
Henning Rogge
(spam-protected)
Wed Mar 27 17:59:42 CET 2013
What does the txtinfo plugin tell you about the known topology/neighbors/routes?
Henning Rogge
On Wed, Mar 27, 2013 at 5:50 PM, Douglas Diniz <(spam-protected)> wrote:
> Hi, sorry, I sent the wrong log. I need to compile Olsrd with the flag
> "-msoft-float", otherwise the printf shows only 0's.
> But this doesn't affect the olsrd internal working.
> The correct log is:
>
> *** olsr.org - 0.6.4-git_-hash_818b16a4ec8c80b704eadb83ce3cc45e - ***
> Build date: 2013-03-27 13:40:47 on dgdiniz-desktop
>
> http://www.olsr.org
>
> Parsing file: "/etc/olsrd.conf"
> Smart gateway system: disabled
> Link quality fish eye 0
>
> Interface Defaultssetting ifs_in_curr_cfg = 0
> HELLO interval: 1.00
> HELLO validity: 10.00
> TC interval: 5.00
> TC validity: 60.00
> MID interval: 5.00
> MID validity: 60.00
> HNA interval: 5.00
> HNA validity: 60.00
>
> Mode: mesh
> IPv4 broadcast/multicast : AUTO (d)
> Mode : mesh (d)
> IPv6 multicast : ff02::6d
> HELLO emission/validity : 2.00/20.00
> TC emission/validity : 5.00/300.00
> MID emission/validity : 5.00/300.00
> HNA emission/validity : 5.00/300.00
>
> Autodetect changes : yes
> IPv4 broadcast/multicast : AUTO
> Mode : mesh (d)
> IPv6 multicast : ::
> HELLO emission/validity : 1.00/10.00
> TC emission/validity : 5.00/60.00
> MID emission/validity : 5.00/60.00
> HNA emission/validity : 5.00/60.00
> Autodetect changes : no
> olsr.org - 0.6.4-git_-hash_818b16a4ec8c80b704eadb83ce3cc45e - detaching
> from the current process...
>
> My olsrd.conf is:
>
>
>
>
>
> #
> # OLSR.org routing daemon config file
> # This file contains the usual options for an ETX based
> # stationary network without fisheye
> # (for other options see olsrd.conf.default.full)
> #
> # Lines starting with a # are discarded
> #
>
> #### ATTENTION for IPv6 users ####
> # Because of limitations in the parser IPv6 addresses must NOT
> # begin with a ":", so please add a "0" as a prefix.
>
> ###########################
> ### Basic configuration ###
> ###########################
> # keep this settings at the beginning of your first configuration file
>
> # Debug level (0-9)
> # If set to 0 the daemon runs in the background, unless "NoFork" is set to
> true
> # (Default is 1)
>
> # DebugLevel 1
>
> # IP version to use (4 or 6)
> # (Default is 4)
>
> # IpVersion 4
>
> #################################
> ### OLSRd agent configuration ###
> #################################
> # this parameters control the settings of the routing agent which are not
> # related to the OLSR protocol and it's extensions
>
> # FIBMetric controls the metric value of the host-routes OLSRd sets.
> # - "flat" means that the metric value is always 2. This is the preferred
> value
> # because it helps the linux kernel routing to clean up older routes
> # - "correct" use the hopcount as the metric value.
> # - "approx" use the hopcount as the metric value too, but does only update
> the
> # hopcount if the nexthop changes too
> # (Default is "flat")
>
> # FIBMetric "flat"
>
> #######################################
> ### Linux specific OLSRd extensions ###
> #######################################
> # these parameters are only working on linux at the moment, but might become
> # useful on BSD in the future
>
> # SrcIpRoutes tells OLSRd to set the Src flag of host routes to the
> originator-ip
> # of the node. In addition to this an additional localhost device is created
> # to make sure the returning traffic can be received.
> # (Default is "no")
>
> # SrcIpRoutes no
>
> # Specify the proto tag to be used for routes olsr inserts into kernel
> # currently only implemented for linux
> # valid values under linux are 1 .. 254
> # 1 gets remapped by olsrd to 0 UNSPECIFIED (1 is reserved for ICMP
> redirects)
> # 2 KERNEL routes (not very wise to use)
> # 3 BOOT (should in fact not be used by routing daemons)
> # 4 STATIC
> # 8 .. 15 various routing daemons (gated, zebra, bird, & co)
> # (defaults to 0 which gets replaced by an OS-specific default value
> # under linux 3 (BOOT) (for backward compatibility)
>
> # RtProto 0
>
> # Activates (in IPv6 mode) the automatic use of NIIT
> # (see README-Olsr-Extensions)
> # (default is "yes")
>
> # UseNiit yes
>
> # Activates the smartgateway ipip tunnel feature.
> # See README-Olsr-Extensions for a description of smartgateways.
> # (default is "no")
>
> SmartGateway no
>
> # Allows the selection of a smartgateway with NAT (only for IPv4)
> # (default is "yes")
>
> # SmartGatewayAllowNAT yes
>
> # Defines what kind of Uplink this node will publish as a
> # smartgateway. The existence of the uplink is detected by
> # a route to 0.0.0.0/0, ::ffff:0:0/96 and/or 2000::/3.
> # possible values are "none", "ipv4", "ipv6", "both"
> # (default is "both")
>
> # SmartGatewayUplink "both"
>
> # Specifies if the local ipv4 uplink use NAT
> # (default is "yes")
>
> # SmartGatewayUplinkNAT yes
>
> # Specifies the speed of the uplink in kilobit/s.
> # First parameter is upstream, second parameter is downstream
> # (default is 128/1024)
>
> # SmartGatewaySpeed 128 1024
>
> # Specifies the EXTERNAL ipv6 prefix of the uplink. A prefix
> # length of more than 64 is not allowed.
> # (default is 0::/0
>
> # SmartGatewayPrefix 0::/0
>
> ##############################
> ### OLSR protocol settings ###
> ##############################
>
> # HNA (Host network association) allows the OLSR to announce
> # additional IPs or IP subnets to the net that are reachable
> # through this node.
> # Syntax for HNA4 is "network-address network-mask"
> # Syntax for HNA6 is "network-address prefix-length"
> # (default is no HNA)
> Hna4
> {
> # Hna4 - Internet gateway:
> #0.0.0.0 0.0.0.0
> # Hna4 - more entries can be added:
> #off168.10.0 255.255.255.0
> #off168.11.0 255.255.255.0
> #off168.12.0 255.255.255.0
> #off168.13.0 255.255.255.0
> #off168.14.0 255.255.255.0
> }
> Hna6
> {
> # Internet gateway
> # 0:: 0
> # specific small networks reachable through this node
> # fec0:2200:106:0:0:0:0:0 48
> }
>
> ################################
> ### OLSR protocol extensions ###
> ################################
>
> # Link quality algorithm (only for lq level 2)
> # (see README-Olsr-Extensions)
> # - "etx_float", a floating point ETX with exponential aging
> # - "etx_fpm", same as ext_float, but with integer arithmetic
> # - "etx_ff" (ETX freifunk), an etx variant which use all OLSR
> # traffic (instead of only hellos) for ETX calculation
> # - "etx_ffeth", an incompatible variant of etx_ff that allows
> # ethernet links with ETX 0.1.
> # (defaults to "etx_ff")
>
> # LinkQualityAlgorithm "etx_ff"
>
> # Fisheye mechanism for TCs (0 meansoff, 1 means on)
> # (default is 1)
>
> LinkQualityFishEye 0
>
> #####################################
> ### Example plugin configurations ###
> #####################################
> # Olsrd plugins to load
> # This must be the absolute path to the file
> # or the loader will use the following scheme:
> # - Try the paths in the LD_LIBRARY_PATH
> # environment variable.
> # - The list of libraries cached in /etc/ld.so.cache
> # - /lib, followed by /usr/lib
> #
> # the examples in this list are for linux, so check if the plugin is
> # available if you use windows/BSD.
> # each plugin should have a README file in it's lib subfolder
>
> # LoadPlugin "olsrd_txtinfo.dll"
> LoadPlugin "olsrd_txtinfo.so.0.1"
> {
> # port number the txtinfo plugin will be listening, default 2006
> # PlParam "port" "81"
> # ip address that can access the plugin, use "0.0.0.0"
> # to allow everyone
> PlParam "Accept" "127.0.0.1"
> }
>
> LoadPlugin "olsrd_dot_draw.so.0.3"
> {
> PlParam "Accept" "127.0.0.1"
> }
>
> LoadPlugin "olsrd_jsoninfo.so.0.0"
> {
> # the default port is 9090 but you can change it like this:
> PlParam "port" "9090"
>
> # You can set a "accept" single address to allow to connect to
> # jsoninfo. If no address is specified, then localhost (127.0.0.1)
> # is allowed by default. jsoninfo will only use the first "accept"
> # parameter specified and will ignore the rest.
>
> # to allow a specific host:
> #PlParam "accept" "172.29.44.23"
> # if you set it to 0.0.0.0, it will accept all connections
> PlParam "accept" "0.0.0.0"
>
> # specify a UUID for this node to track it for debugging
> #PlParam "UUIDFile" "/etc/olsrd/olsrd.uuid"
> }
>
> #############################################
> ### OLSRD default interface configuration ###
> #############################################
> # the default interface section can have the same values as the following
> # interface configuration. It will allow you so set common options for all
> # interfaces.
>
> InterfaceDefaults {
> # Ip4Broadcast 255.255.255.255
> }
>
> ######################################
> ### OLSRd Interfaces configuration ###
> ######################################
> # multiple interfaces can be specified for a single configuration block
> # multiple configuration blocks can be specified
>
> # WARNING, don't forget to insert your interface names here !
> Interface "wlan0"
> {
> # Interface Mode is used to prevent unnecessary
> # packet forwarding on switched ethernet interfaces
> # valid Modes are "mesh" and "ether"
> # (default is "mesh")
>
> HelloInterval 1.0
> HelloValidityTime 10.0
> TcInterval 5.0
> TcValidityTime 60.0
> MidInterval 5.0
> MidValidityTime 60.0
> HnaInterval 5.0
> HnaValidityTime 60.0
>
> Mode "mesh"
>
> }
>
>
> On Wed, Mar 27, 2013 at 12:41 PM, Henning Rogge <(spam-protected)>
> wrote:
>>
>> Default and interface timings all zero? That sounds badly wrong.
>>
>> Can you post your olsr config file?
>>
>> Henning
>>
>>
>> On Wed, Mar 27, 2013 at 4:38 PM, Douglas Diniz <(spam-protected)> wrote:
>> > Hi, I was using Olsrd 0.6.4 and now I updated to 0.6.5.2.
>> > I'm cross-compiling to PowerPc.
>> >
>> > Now when I run "olsrd -f /etc/olsrd.conf" the process freezes, and stops
>> > at
>> > this point:
>> >
>> > *** olsr.org - 0.6.5.2-git_-hash_64c0ebc7d623ac4986be69c7f7130d13 -
>> > ***
>> > Build date: 2013-03-27 11:50:13 on dgdiniz-desktop
>> > http://www.olsr.org
>> >
>> >
>> > Sometimes the process starts fine, but most of the time the process
>> > stops at
>> > this point.
>> > Other times the process continue to run after some seconds, but most of
>> > time
>> > it freezes for a long time.
>> >
>> >
>> > Olsrd version 0.6.4 starts fine every time:
>> >
>> > *** olsr.org - 0.6.4-git_-hash_9297fc2b2ddda43b84f0e26d5f2e06be - ***
>> > Build date: 2012-11-16 11:57:22 on dgdiniz-desktop
>> > http://www.olsr.org
>> >
>> > Parsing file: "/etc/olsrd.conf"
>> > Smart gateway system: disabled
>> > Link quality fish eye 0
>> >
>> > Interface Defaultssetting ifs_in_curr_cfg = 0
>> > HELLO interval: 0.00
>> > HELLO validity: 0.00
>> > TC interval: 0.00
>> > TC validity: 0.00
>> > MID interval: 0.00
>> > MID validity: 0.00
>> > HNA interval: 0.00
>> > HNA validity: 0.00
>> > Mode: mesh
>> > IPv4 broadcast/multicast : AUTO (d)
>> > Mode : mesh (d)
>> > IPv6 multicast : ff02::6d
>> > HELLO emission/validity : 0.00L�/0.00(null)
>> > TC emission/validity : 0.00L�/0.00(null)
>> > MID emission/validity : 0.00L�/0.00(null)
>> > HNA emission/validity : 0.00L�/0.00(null)
>> > Autodetect changes : yes
>> > IPv4 broadcast/multicast : AUTO
>> > Mode : mesh (d)
>> > IPv6 multicast : ::
>> > HELLO emission/validity : 0.00L�/0.00(null)
>> > TC emission/validity : 0.00L�/0.00(null)
>> > MID emission/validity : 0.00L�/0.00(null)
>> > HNA emission/validity : 0.00L�/0.00(null)
>> > Autodetect changes : no
>> > olsr.org - 0.6.4-git_-hash_9297fc2b2ddda43b84f0e26d5f2e06be -
>> > detaching
>> > from the current process...
>> >
>> >
>> >
>> > Someone knows what is happening?
>> >
>> > Thanks
>> >
>> > --
>> > Olsr-dev mailing list
>> > (spam-protected)
>> > https://lists.olsr.org/mailman/listinfo/olsr-dev
>>
>>
>>
>> --
>> We began as wanderers, and we are wanderers still. We have lingured
>> long enough on the shores of the cosmic ocean. We are ready at last to
>> set sail for the stars - Carl Sagan
>
>
>
>
--
We began as wanderers, and we are wanderers still. We have lingured
long enough on the shores of the cosmic ocean. We are ready at last to
set sail for the stars - Carl Sagan
More information about the Olsr-dev
mailing list