[Olsr-dev] cannot compile on ARM Arch Linux

[Ferry Huberts]

BTW, it's strange that you have this problem because our Android build
is just fine. It's been building fine for over 6 months now on our Jenkins.

We build it this way:
> make NDK_BASE="/opt/android-ndk-r8d" OS="android" DESTDIR="$(pwd)/dist/debug" DEBUG=1 MAKEBIN=1 cfgparser_install cfgparser_clean
> make NDK_BASE="/opt/android-ndk-r8d" OS="android" DESTDIR="$(pwd)/dist/debug" DEBUG=1 build_all install_all
> make uberclean
> make NDK_BASE="/opt/android-ndk-r8d" OS="android" DESTDIR="$(pwd)/dist/release" DEBUG=0 MAKEBIN=1 cfgparser_install cfgparser_clean
> make NDK_BASE="/opt/android-ndk-r8d" OS="android" DESTDIR="$(pwd)/dist/release" DEBUG=0 build_all install_all



On 25/07/13 16:06, Ferry Huberts wrote:
> 
> 
> On 25/07/13 16:00, Saverio Proto wrote:
>> The most strange thing.
>>
>> Calling:
>>
>> make httpinfo
>>
>> compiles just fine.
>>
>> the problem is when I compile calling
>>
>> make libs
>>
>> Ferry I can give you ssh access over IPv6 if you want.
> 
> No need, I've not yet enabled IPv6 on my network
> 
> Try fiddling a bit more with the makefiles.
> make sure to do a clean before building with an adjusted makefile ;-)
> 
>>
>>
>> Saverio
>>
>> 2013/7/25 Saverio Proto <(spam-protected)>:
>>> No it does not work
>>>
>>> make[1]: Entering directory `/usr/src/olsrd/lib/httpinfo'
>>> make[1]: Leaving directory `/usr/src/olsrd/lib/httpinfo'
>>> make[1]: Entering directory `/usr/src/olsrd/lib/httpinfo'
>>> [CC] src/olsrd_plugin.c
>>> [CC] src/olsrd_httpinfo.c
>>> [CC] src/admin_interface.c
>>> [LD] olsrd_httpinfo.so.0.1
>>> /usr/bin/ld: ../../src/cfgparser/cfgfile_gen.o: relocation
>>> R_ARM_MOVW_ABS_NC against `a local symbol' can not be used when making
>>> a shared object; recompile with -fPIC
>>> ../../src/cfgparser/cfgfile_gen.o: could not read symbols: Bad value
>>> collect2: error: ld returned 1 exit status
>>> make[1]: *** [olsrd_httpinfo.so.0.1] Error 1
>>> make[1]: Leaving directory `/usr/src/olsrd/lib/httpinfo'
>>> make: *** [libs] Error 2
>>> [(spam-protected) olsrd]# git diff
>>> diff --git a/src/cfgparser/Makefile b/src/cfgparser/Makefile
>>> index d318410..6ddae61 100644
>>> --- a/src/cfgparser/Makefile
>>> +++ b/src/cfgparser/Makefile
>>> @@ -61,7 +61,7 @@ endif
>>>
>>>  ifdef MAKEBIN
>>>
>>> -CPPFLAGS +=    -DMAKEBIN
>>> +CPPFLAGS +=    -DMAKEBIN -fPIC
>>>  NAME =         $(BINNAME)
>>>
>>>  else
>>> [(spam-protected) olsrd]#
>>>
>>>
>>> Saverio
>>>
>>> 2013/7/25 Ferry Huberts <(spam-protected)>:
>>>> try adding -fPIC to line 66 of src/cfgparser and see if that works.
>>>> if so, pls tell me and I'll try it on all our builds
>>>>
>>>> On 25/07/13 15:36, Saverio Proto wrote:
>>>>> Hello,
>>>>>
>>>>> I wanted to compile olsrd for my cubieboard. I am compiling directly
>>>>> on the ARM board. Compiling the core is fine. When I go for make libs
>>>>> I get the following problem:
>>>>>
>>>>> ake[1]: Entering directory `/usr/src/olsrd/lib/httpinfo'
>>>>> make[1]: Leaving directory `/usr/src/olsrd/lib/httpinfo'
>>>>> make[1]: Entering directory `/usr/src/olsrd/lib/httpinfo'
>>>>> [CC] src/olsrd_plugin.c
>>>>> [CC] src/olsrd_httpinfo.c
>>>>> [CC] src/admin_interface.c
>>>>> [LD] olsrd_httpinfo.so.0.1
>>>>> /usr/bin/ld: ../../src/cfgparser/cfgfile_gen.o: relocation
>>>>> R_ARM_MOVW_ABS_NC against `a local symbol' can not be used when making
>>>>> a shared object; recompile with -fPIC
>>>>> ../../src/cfgparser/cfgfile_gen.o: could not read symbols: Bad value
>>>>> collect2: error: ld returned 1 exit status
>>>>> make[1]: *** [olsrd_httpinfo.so.0.1] Error 1
>>>>> make[1]: Leaving directory `/usr/src/olsrd/lib/httpinfo'
>>>>> make: *** [libs] Error 2
>>>>>
>>>>> any hint how to fix the Makefile ?
>>>>>
>>>>> Saverio
>>>>>
>>>>
>>>> --
>>>> Ferry Huberts
> 

-- 
Ferry Huberts