[Olsr-dev] Problems with oslrd running
Airton Ishimori
(spam-protected)
Mon Mar 15 19:00:39 CET 2010
the output generated is:
(spam-protected):~# olsrd -d 2
*** olsr.org - 0.5.6-r8 ***
Build date: 2010-03-15 09:44:55 on machine
http://www.olsr.org
Parsing file: "/etc/olsrd.conf"
IPv4 broadcast/multicast : AUTO
Mode : mesh
IPv6 multicast : ::
HELLO emission/validity : 2.00 (d)/60.00 (d)
TC emission/validity : 5.00 (d)/90.00 (d)
MID emission/validity : 5.00 (d)/90.00 (d)
HNA emission/validity : 5.00 (d)/90.00 (d)
Autodetect changes : no
*** olsrd configuration ***
Debug Level : 2
IpVersion : 4
No interfaces : ALLOWED
TOS : 0x10
OlsrPort : 0x2ba
RtTable : 0xfe
RtTableDefault : 0x00
Willingness : 4
IPC connections : 0
Host 127.0.0.1
Pollrate : 0.05
NIC ChangPollrate: 2.50
TC redundancy : 2
MPR coverage : 3
LQ level : 2
LQ fish eye : 1
LQ Dijkstra limit: 255, 0.00
LQ aging factor : 0.100000
LQ algorithm name: default
NAT threshold : 0.500000
Clear screen : no
InterfaceDefaults:
IPv4 broadcast/multicast : AUTO
Mode : mesh
IPv6 multicast : ff02::1
HELLO emission/validity : 2.00/20.00
TC emission/validity : 5.00/300.00
MID emission/validity : 5.00/300.00
HNA emission/validity : 5.00/300.00
Autodetect changes : yes
dev: "eth1"
IPv4 broadcast/multicast : AUTO (d)
Mode : mesh (d)
IPv6 multicast : ff02::1 (d)
HELLO emission/validity : 2.00/60.00
TC emission/validity : 5.00/90.00
MID emission/validity : 5.00/90.00
HNA emission/validity : 5.00/90.00
Autodetect changes : yes (d)
Plugins:
Name: "olsrd_httpinfo.so.0.1"
Not using hysteresis
HNA4 entries:
0.0.0.0/0.0.0.0
10.152.0.64/255.255.255.224
10.151.2.0/255.255.255.224
Added 0.0.0.0 to IP deny set
Added 127.0.0.1 to IP deny set
---- Interface configuration ----
Checking eth1:
Wireless interface detected
Metric: 0
MTU - IPhdr: 1472
Index 3
Address:10.151.2.1
Netmask:255.255.0.0
Broadcast address:10.151.255.255
Adding OLSR socket entry 5
New main address: 10.151.2.1
Using 'etx_ff' algorithm for lq calculation.
TC: add entry 10.151.2.1
RIB: add prefix 10.151.2.1/32 from 10.151.2.1
---------- LOADING LIBRARY olsrd_httpinfo.so.0.1 ----------
Httpinfo olsrd plugin 0.1 by Andreas Tønnesen
Checking plugin interface version: 5 - OK
Trying to fetch plugin init function: OK
Trying to fetch parameter table and it's size...
Sending parameters...
"Net"/"0.0.0.0 0.0.0.0"... Illegal instruction
What is the last line? Would be my ip addess and netmask?
On Mon, Mar 15, 2010 at 14:54, Airton Ishimori <(spam-protected)>wrote:
> I could running olsrd-0.5.6-r8 in background (thanks for all), but I not
> could do httpinfo plugin run, maybe is the olsrd_httpinfo.so.0.1 lib that
> it`s old. Wich the most recently version of olsrd_httpinfo.so ?? exist ?
>
>
>
> On Mon, Mar 15, 2010 at 13:53, Markus Kittenberger <
> (spam-protected)> wrote:
>
>> if you really did NOT install the HTTPINFO plugin
>>
>> than tell me what is olsrd loading?
>>
>> usually there would be a file not found error message if the configured
>> plugin is missing,..
>>
>> so somewhere (e.g. /usr/lib or /lib) on your system is an probably old
>> plugin (olsrd_httpinfo.so.0.1), which probably causes your problems
>>
>> so either install a correct plugin file or remove the
>> LoadPlugin "olsrd_httpinfo.so.0.1" { ... }
>>
>> Markus
>>
>> On Mon, Mar 15, 2010 at 5:29 PM, Airton Ishimori <(spam-protected)>wrote:
>>
>>> I not remove httinfo plugin. I just not installed the httinfo plugin.
>>>
>>> (spam-protected):~# olsrd -d 9
>>>
>>>
>>> *** olsr.org - 0.5.6-r8 ***
>>> Build date: 2010-03-15 09:44:55 on machine
>>> http://www.olsr.org
>>>
>>> Parsing file: "/etc/olsrd.conf"
>>> IPv4 broadcast/multicast : AUTO
>>> Mode : mesh
>>> IPv6 multicast : ::
>>> HELLO emission/validity : 2.00 (d)/60.00 (d)
>>> TC emission/validity : 5.00 (d)/90.00 (d)
>>> MID emission/validity : 5.00 (d)/90.00 (d)
>>> HNA emission/validity : 5.00 (d)/90.00 (d)
>>> Autodetect changes : no
>>> *** olsrd configuration ***
>>> Debug Level : 9
>>> IpVersion : 4
>>> No interfaces : ALLOWED
>>> TOS : 0x10
>>> OlsrPort : 0x2ba
>>> RtTable : 0xfe
>>> RtTableDefault : 0x00
>>> Willingness : 4
>>> IPC connections : 0
>>> Host 127.0.0.1
>>> Pollrate : 0.05
>>> NIC ChangPollrate: 2.50
>>> TC redundancy : 2
>>> MPR coverage : 3
>>> LQ level : 2
>>> LQ fish eye : 1
>>> LQ Dijkstra limit: 255, 0.00
>>> LQ aging factor : 0.100000
>>> LQ algorithm name: default
>>> NAT threshold : 0.500000
>>> Clear screen : no
>>> InterfaceDefaults:
>>> IPv4 broadcast/multicast : AUTO
>>> Mode : mesh
>>> IPv6 multicast : ff02::1
>>> HELLO emission/validity : 2.00/20.00
>>> TC emission/validity : 5.00/300.00
>>> MID emission/validity : 5.00/300.00
>>> HNA emission/validity : 5.00/300.00
>>> Autodetect changes : yes
>>> dev: "eth1"
>>> IPv4 broadcast/multicast : AUTO (d)
>>> Mode : mesh (d)
>>> IPv6 multicast : ff02::1 (d)
>>> HELLO emission/validity : 2.00/60.00
>>> TC emission/validity : 5.00/90.00
>>> MID emission/validity : 5.00/90.00
>>> HNA emission/validity : 5.00/90.00
>>> Autodetect changes : yes (d)
>>> Plugins:
>>> Name: "olsrd_httpinfo.so.0.1"
>>> Not using hysteresis
>>> HNA4 entries:
>>> 0.0.0.0/Prefix 0 = Netmask: 0.0.0.0
>>> 0.0.0.0
>>> 10.152.0.64/Prefix 27 = Netmask: 255.255.255.224
>>> 255.255.255.224
>>> 10.151.2.0/Prefix 27 = Netmask: 255.255.255.224
>>> 255.255.255.224
>>>
>>> IP forwarding is enabled on this system
>>> Initializing parser...
>>> Parser: registering event for type 201
>>> Register parse function: Added function for type 201
>>> Parser: registering event for type 202
>>> Register parse function: Added function for type 202
>>> Parser: registering event for type 3
>>> Register parse function: Added function for type 3
>>> Parser: registering event for type 4
>>> Register parse function: Added function for type 4
>>> Added 0.0.0.0 to IP deny set
>>> Added 127.0.0.1 to IP deny set
>>>
>>> ---- Interface configuration ----
>>>
>>> Checking eth1:
>>> Wireless interface detected
>>> Metric: 0
>>> MTU - IPhdr: 1472
>>> Index 3
>>> Address:10.151.2.1
>>> Netmask:255.255.0.0
>>> Broadcast address:10.151.255.255
>>> Binding socket 5 to device eth1
>>> Binding socket 7 to device eth1
>>> Adding OLSR socket entry 5
>>> New main address: 10.151.2.1
>>> TIMER: start Hello Generation timer 0x10010920 firing in 00:00:01.837,
>>> ctx 0x1000bd88
>>> TIMER: start TC Generation timer 0x10010940 firing in 00:00:04.407, ctx
>>> 0x1000bd88
>>> TIMER: start MID Generation timer 0x10010960 firing in 00:00:04.000, ctx
>>> 0x1000bd88
>>> TIMER: start HNA Generation timer 0x10010980 firing in 00:00:04.878, ctx
>>> 0x1000bd88
>>> TIMER: start Interface Polling timer 0x100109a0 firing in 00:00:01.953,
>>> ctx (nil)
>>> TIMER: start unknown timer 0x100109c0 firing in 00:00:00.600, ctx (nil)
>>> Using 'etx_ff' algorithm for lq calculation.
>>> Parser: registering packetparser
>>> Registered packetparser function
>>> TIMER: start unknown timer 0x100109e0 firing in 00:00:01.000, ctx (nil)
>>> TIMER: start unknown timer 0x10010a00 firing in 00:00:14.132, ctx (nil)
>>> RIB: init routing tree
>>> TC: init topo
>>> TC: add entry 10.151.2.1
>>> RIB: add prefix 10.151.2.1/32 from 10.151.2.1
>>> MPRS: Init
>>> MID: init
>>>
>>> ---------- LOADING LIBRARY olsrd_httpinfo.so.0.1 ----------
>>> Httpinfo olsrd plugin 0.1 by Andreas Tønnesen
>>> Checking plugin interface version: 5 - OK
>>> Trying to fetch plugin init function: OK
>>> Trying to fetch parameter table and it's size...
>>> Sending parameters...
>>> "Net"/"0.0.0.0 0.0.0.0"... Illegal instruction
>>>
>>>
>>>
>>> On Mon, Mar 15, 2010 at 12:59, Markus Kittenberger <
>>> (spam-protected)> wrote:
>>>
>>>> interesting,..
>>>>
>>>> what happens if u remove the usage of httpinfo plugin from the
>>>> olsrd.conf?
>>>>
>>>> furthermore try an higher debuglevel
>>>>
>>>> and how did you create the httpinfo plugin file?
>>>>
>>>> Markus
>>>>
>>>> On Mon, Mar 15, 2010 at 4:40 PM, Airton Ishimori <
>>>> (spam-protected)> wrote:
>>>>
>>>>> I executed the follow command..
>>>>>
>>>>> (spam-protected):~# olsrd -nofork
>>>>>
>>>>>
>>>>> *** olsr.org - 0.5.6-r8 ***
>>>>> Build date: 2010-03-15 09:44:55 on machine
>>>>> http://www.olsr.org
>>>>>
>>>>> Parsing file: "/etc/olsrd.conf"
>>>>> IPv4 broadcast/multicast : AUTO
>>>>> Mode : mesh
>>>>> IPv6 multicast : ::
>>>>> HELLO emission/validity : 2.00 (d)/60.00 (d)
>>>>> TC emission/validity : 5.00 (d)/90.00 (d)
>>>>> MID emission/validity : 5.00 (d)/90.00 (d)
>>>>> HNA emission/validity : 5.00 (d)/90.00 (d)
>>>>> Autodetect changes : no
>>>>> ---------- LOADING LIBRARY olsrd_httpinfo.so.0.1 ----------
>>>>> Httpinfo olsrd plugin 0.1 by Andreas Tønnesen
>>>>> Checking plugin interface version: 5 - OK
>>>>> Illegal instruction
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Mar 15, 2010 at 12:24, Markus Kittenberger <
>>>>> (spam-protected)> wrote:
>>>>>
>>>>>> please run this on the console
>>>>>>
>>>>>> olsrd -nofork
>>>>>>
>>>>>> an report what (especially the last line) the output is,..
>>>>>>
>>>>>> regards Markus
>>>>>>
>>>>>> On Mon, Mar 15, 2010 at 2:34 PM, Airton Ishimori <
>>>>>> (spam-protected)> wrote:
>>>>>>
>>>>>>> Hey,
>>>>>>>
>>>>>>> My olsrd not keep running... but I can call olsrd manually with olsrd
>>>>>>> command, however the olsrd daemon not keep running. When I call olsrd in the
>>>>>>> prompt, the output is
>>>>>>>
>>>>>>> (spam-protected):~# olsrd
>>>>>>>
>>>>>>> *** olsr.org - 0.5.6-r8 ***
>>>>>>> Build date: 2010-03-15 09:44:55 on machine
>>>>>>> http://www.olsr.org
>>>>>>>
>>>>>>> Parsing file: "/etc/olsrd.conf"
>>>>>>> IPv4 broadcast/multicast : AUTO
>>>>>>> Mode : mesh
>>>>>>> IPv6 multicast : ::
>>>>>>> HELLO emission/validity : 2.00 (d)/60.00 (d)
>>>>>>> TC emission/validity : 5.00 (d)/90.00 (d)
>>>>>>> MID emission/validity : 5.00 (d)/90.00 (d)
>>>>>>> HNA emission/validity : 5.00 (d)/90.00 (d)
>>>>>>> Autodetect changes : no
>>>>>>> olsr.org - 0.5.6-r8 detaching from the current process...
>>>>>>>
>>>>>>> My olsrd.conf file is configured with Debug Level 0 (default, that
>>>>>>> means the olsrd keep running in background).
>>>>>>>
>>>>>>> My ps comand show me this:
>>>>>>>
>>>>>>> (spam-protected):~# ps -e
>>>>>>> PID Uid VmSize Stat Command
>>>>>>> 1 root 356 S init
>>>>>>> 2 root SW [keventd]
>>>>>>> 3 root RWN [ksoftirqd_CPU0]
>>>>>>> 4 root SW [kswapd]
>>>>>>> 5 root SW [bdflush]
>>>>>>> 6 root SW [kupdated]
>>>>>>> 8 root SW [mtdblockd]
>>>>>>> 70 root SWN [jffs2_gcd_mtd4]
>>>>>>> 92 root 348 S syslogd -C 16
>>>>>>> 95 root 344 S logger -s -p 6 -t
>>>>>>> 98 root 356 S init
>>>>>>> 100 root 300 S klogd
>>>>>>> 369 root 320 S wifi up
>>>>>>> 411 root 392 S /usr/sbin/dropbear
>>>>>>> 416 root 368 S httpd -p 80 -h /www -r id2
>>>>>>> 420 root 264 S telnetd -l /bin/login
>>>>>>> 433 root 336 S crond -c /etc/crontabs
>>>>>>> 450 nobody 412 S dnsmasq -K -F
>>>>>>> 10.152.0.67,10.152.0.86,255.255.255.224,0 -I vlan1
>>>>>>> 526 root 492 S /usr/bin/wifidog
>>>>>>> 702 root 492 S /usr/bin/wifidog
>>>>>>> 703 root 492 S /usr/bin/wifidog
>>>>>>> 704 root 492 S /usr/bin/wifidog
>>>>>>> 705 root 492 S /usr/bin/wifidog
>>>>>>> 717 root 444 S iperf -s -D
>>>>>>> 833 root 596 S /usr/sbin/dropbear
>>>>>>> 834 root 528 S -ash
>>>>>>> 1344 root 344 R ps -e
>>>>>>>
>>>>>>> The my olsrd was installed from ipk package generate with
>>>>>>> OpenWRT-SDK, becouse I wanted. However, but not would has different for run
>>>>>>> olsrd daemon...
>>>>>>>
>>>>>>> The olsrd was installed into OpenWRT whiterussian on LinkSys Router
>>>>>>> 54GL.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Olsr-dev mailing list
>>>>>>> (spam-protected)
>>>>>>> http://lists.olsr.org/mailman/listinfo/olsr-dev
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20100315/974a4b7b/attachment.html>
More information about the Olsr-dev
mailing list