[Olsr-dev] Problems with oslrd running
Airton Ishimori
(spam-protected)
Mon Mar 15 17:29:59 CET 2010
I not remove httinfo plugin. I just not installed the httinfo plugin.
(spam-protected):~# olsrd -d 9
*** olsr.org - 0.5.6-r8 ***
Build date: 2010-03-15 09:44:55 on machine
http://www.olsr.org
Parsing file: "/etc/olsrd.conf"
IPv4 broadcast/multicast : AUTO
Mode : mesh
IPv6 multicast : ::
HELLO emission/validity : 2.00 (d)/60.00 (d)
TC emission/validity : 5.00 (d)/90.00 (d)
MID emission/validity : 5.00 (d)/90.00 (d)
HNA emission/validity : 5.00 (d)/90.00 (d)
Autodetect changes : no
*** olsrd configuration ***
Debug Level : 9
IpVersion : 4
No interfaces : ALLOWED
TOS : 0x10
OlsrPort : 0x2ba
RtTable : 0xfe
RtTableDefault : 0x00
Willingness : 4
IPC connections : 0
Host 127.0.0.1
Pollrate : 0.05
NIC ChangPollrate: 2.50
TC redundancy : 2
MPR coverage : 3
LQ level : 2
LQ fish eye : 1
LQ Dijkstra limit: 255, 0.00
LQ aging factor : 0.100000
LQ algorithm name: default
NAT threshold : 0.500000
Clear screen : no
InterfaceDefaults:
IPv4 broadcast/multicast : AUTO
Mode : mesh
IPv6 multicast : ff02::1
HELLO emission/validity : 2.00/20.00
TC emission/validity : 5.00/300.00
MID emission/validity : 5.00/300.00
HNA emission/validity : 5.00/300.00
Autodetect changes : yes
dev: "eth1"
IPv4 broadcast/multicast : AUTO (d)
Mode : mesh (d)
IPv6 multicast : ff02::1 (d)
HELLO emission/validity : 2.00/60.00
TC emission/validity : 5.00/90.00
MID emission/validity : 5.00/90.00
HNA emission/validity : 5.00/90.00
Autodetect changes : yes (d)
Plugins:
Name: "olsrd_httpinfo.so.0.1"
Not using hysteresis
HNA4 entries:
0.0.0.0/Prefix 0 = Netmask: 0.0.0.0
0.0.0.0
10.152.0.64/Prefix 27 = Netmask: 255.255.255.224
255.255.255.224
10.151.2.0/Prefix 27 = Netmask: 255.255.255.224
255.255.255.224
IP forwarding is enabled on this system
Initializing parser...
Parser: registering event for type 201
Register parse function: Added function for type 201
Parser: registering event for type 202
Register parse function: Added function for type 202
Parser: registering event for type 3
Register parse function: Added function for type 3
Parser: registering event for type 4
Register parse function: Added function for type 4
Added 0.0.0.0 to IP deny set
Added 127.0.0.1 to IP deny set
---- Interface configuration ----
Checking eth1:
Wireless interface detected
Metric: 0
MTU - IPhdr: 1472
Index 3
Address:10.151.2.1
Netmask:255.255.0.0
Broadcast address:10.151.255.255
Binding socket 5 to device eth1
Binding socket 7 to device eth1
Adding OLSR socket entry 5
New main address: 10.151.2.1
TIMER: start Hello Generation timer 0x10010920 firing in 00:00:01.837, ctx
0x1000bd88
TIMER: start TC Generation timer 0x10010940 firing in 00:00:04.407, ctx
0x1000bd88
TIMER: start MID Generation timer 0x10010960 firing in 00:00:04.000, ctx
0x1000bd88
TIMER: start HNA Generation timer 0x10010980 firing in 00:00:04.878, ctx
0x1000bd88
TIMER: start Interface Polling timer 0x100109a0 firing in 00:00:01.953, ctx
(nil)
TIMER: start unknown timer 0x100109c0 firing in 00:00:00.600, ctx (nil)
Using 'etx_ff' algorithm for lq calculation.
Parser: registering packetparser
Registered packetparser function
TIMER: start unknown timer 0x100109e0 firing in 00:00:01.000, ctx (nil)
TIMER: start unknown timer 0x10010a00 firing in 00:00:14.132, ctx (nil)
RIB: init routing tree
TC: init topo
TC: add entry 10.151.2.1
RIB: add prefix 10.151.2.1/32 from 10.151.2.1
MPRS: Init
MID: init
---------- LOADING LIBRARY olsrd_httpinfo.so.0.1 ----------
Httpinfo olsrd plugin 0.1 by Andreas Tønnesen
Checking plugin interface version: 5 - OK
Trying to fetch plugin init function: OK
Trying to fetch parameter table and it's size...
Sending parameters...
"Net"/"0.0.0.0 0.0.0.0"... Illegal instruction
On Mon, Mar 15, 2010 at 12:59, Markus Kittenberger <
(spam-protected)> wrote:
> interesting,..
>
> what happens if u remove the usage of httpinfo plugin from the olsrd.conf?
>
> furthermore try an higher debuglevel
>
> and how did you create the httpinfo plugin file?
>
> Markus
>
> On Mon, Mar 15, 2010 at 4:40 PM, Airton Ishimori <(spam-protected)>wrote:
>
>> I executed the follow command..
>>
>> (spam-protected):~# olsrd -nofork
>>
>>
>> *** olsr.org - 0.5.6-r8 ***
>> Build date: 2010-03-15 09:44:55 on machine
>> http://www.olsr.org
>>
>> Parsing file: "/etc/olsrd.conf"
>> IPv4 broadcast/multicast : AUTO
>> Mode : mesh
>> IPv6 multicast : ::
>> HELLO emission/validity : 2.00 (d)/60.00 (d)
>> TC emission/validity : 5.00 (d)/90.00 (d)
>> MID emission/validity : 5.00 (d)/90.00 (d)
>> HNA emission/validity : 5.00 (d)/90.00 (d)
>> Autodetect changes : no
>> ---------- LOADING LIBRARY olsrd_httpinfo.so.0.1 ----------
>> Httpinfo olsrd plugin 0.1 by Andreas Tønnesen
>> Checking plugin interface version: 5 - OK
>> Illegal instruction
>>
>>
>>
>>
>> On Mon, Mar 15, 2010 at 12:24, Markus Kittenberger <
>> (spam-protected)> wrote:
>>
>>> please run this on the console
>>>
>>> olsrd -nofork
>>>
>>> an report what (especially the last line) the output is,..
>>>
>>> regards Markus
>>>
>>> On Mon, Mar 15, 2010 at 2:34 PM, Airton Ishimori <
>>> (spam-protected)> wrote:
>>>
>>>> Hey,
>>>>
>>>> My olsrd not keep running... but I can call olsrd manually with olsrd
>>>> command, however the olsrd daemon not keep running. When I call olsrd in the
>>>> prompt, the output is
>>>>
>>>> (spam-protected):~# olsrd
>>>>
>>>> *** olsr.org - 0.5.6-r8 ***
>>>> Build date: 2010-03-15 09:44:55 on machine
>>>> http://www.olsr.org
>>>>
>>>> Parsing file: "/etc/olsrd.conf"
>>>> IPv4 broadcast/multicast : AUTO
>>>> Mode : mesh
>>>> IPv6 multicast : ::
>>>> HELLO emission/validity : 2.00 (d)/60.00 (d)
>>>> TC emission/validity : 5.00 (d)/90.00 (d)
>>>> MID emission/validity : 5.00 (d)/90.00 (d)
>>>> HNA emission/validity : 5.00 (d)/90.00 (d)
>>>> Autodetect changes : no
>>>> olsr.org - 0.5.6-r8 detaching from the current process...
>>>>
>>>> My olsrd.conf file is configured with Debug Level 0 (default, that means
>>>> the olsrd keep running in background).
>>>>
>>>> My ps comand show me this:
>>>>
>>>> (spam-protected):~# ps -e
>>>> PID Uid VmSize Stat Command
>>>> 1 root 356 S init
>>>> 2 root SW [keventd]
>>>> 3 root RWN [ksoftirqd_CPU0]
>>>> 4 root SW [kswapd]
>>>> 5 root SW [bdflush]
>>>> 6 root SW [kupdated]
>>>> 8 root SW [mtdblockd]
>>>> 70 root SWN [jffs2_gcd_mtd4]
>>>> 92 root 348 S syslogd -C 16
>>>> 95 root 344 S logger -s -p 6 -t
>>>> 98 root 356 S init
>>>> 100 root 300 S klogd
>>>> 369 root 320 S wifi up
>>>> 411 root 392 S /usr/sbin/dropbear
>>>> 416 root 368 S httpd -p 80 -h /www -r id2
>>>> 420 root 264 S telnetd -l /bin/login
>>>> 433 root 336 S crond -c /etc/crontabs
>>>> 450 nobody 412 S dnsmasq -K -F
>>>> 10.152.0.67,10.152.0.86,255.255.255.224,0 -I vlan1
>>>> 526 root 492 S /usr/bin/wifidog
>>>> 702 root 492 S /usr/bin/wifidog
>>>> 703 root 492 S /usr/bin/wifidog
>>>> 704 root 492 S /usr/bin/wifidog
>>>> 705 root 492 S /usr/bin/wifidog
>>>> 717 root 444 S iperf -s -D
>>>> 833 root 596 S /usr/sbin/dropbear
>>>> 834 root 528 S -ash
>>>> 1344 root 344 R ps -e
>>>>
>>>> The my olsrd was installed from ipk package generate with OpenWRT-SDK,
>>>> becouse I wanted. However, but not would has different for run olsrd
>>>> daemon...
>>>>
>>>> The olsrd was installed into OpenWRT whiterussian on LinkSys Router
>>>> 54GL.
>>>>
>>>>
>>>>
>>>> --
>>>> Olsr-dev mailing list
>>>> (spam-protected)
>>>> http://lists.olsr.org/mailman/listinfo/olsr-dev
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20100315/30e36ace/attachment.html>
More information about the Olsr-dev
mailing list