[Olsr-dev] question on configuration of dot draw plugin

[Henning Rogge]

Am Mon October 19 2009 11:42:28 schrieb ZioPRoTo (Saverio Proto):
> > I think all 0.5.6 plugins only allow only a single "accept" IP. The
> > rewrite to the new telnet/http core in the development tip will solve
> > this problem.
> >
> > Of course you can always allow 0/0 and use iptables to block unwanted
> > network parts.
>
> Ehm, I am confused !
>
> so 0/0 is a wildcard I can use in the configuration of the dot-draw
> plugin of the 0.5.6 branch to accept connections from
> any IP ??
You can try this patch... it should allow ANY IP to access txtinfo/dotdraw if 
you set "0.0.0.0" as the accepted IP.

Henning

-- 
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Neuenahrer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-263,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de
GPG: E1C6 0914 490B 3909 D944 F80D 4487 C67C 55EC CFE0

-------------- next part --------------
A non-text attachment was scrubbed...
Name: any_ip.patch
Type: text/x-patch
Size: 1510 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20091019/ee622aae/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20091019/ee622aae/attachment.sig>