[Olsr-dev] os x issue help

[Mark K.]

True...it did compile.  However, I'm still having the original issue I  
cited.  I do not understand why the routing tables are not updating at  
all since it says it's receiving packets from the other host.


On Jan 9, 2009, at 2:27 PM, L. Aaron Kaplan wrote:

>
> ah, yes... ok..
>
> in OS X just for the time being in tip please just set
> LDFLAGS_EXE += ""
> instead of
> LDFLAGS_EXE +=  -Wl,-export-dynamic
>
> then it will compile.
>
>
>
> On Jan 9, 2009, at 9:18 PM, Mark K. wrote:
>
>> I thought export-dynamic might have been the problem, so I modified  
>> the makefile and forced it to use the dynamic list you setup.   
>> Unfortunately, I still couldn't compile.
>>
>> here's the error:
>>
>> ld: unknown option: --dynamic-list=olsrd.exports
>> collect2: ld returned 1 exit status
>> make: *** [olsrd] Error 1
>>
>> I'm still trying to figure out why this compile process is failing,  
>> I'll keep looking.  I'm using the built-in gcc 4.0.1 on os x 10.5.6.
>>
>>
>> On Jan 9, 2009, at 12:36 PM, L. Aaron Kaplan wrote:
>>
>>>
>>> Mark,
>>>
>>> First question: we recently fixed a severe bug in OS X where no  
>>> packets where sent out.
>>> Was your version before or after this fix? (if unsure - try again  
>>> with http://gredler.at/hg/olsrd/archive/tip.tar.gz)
>>>
>>> Second: can you tell me how you configured the tapX devices? Is  
>>> that part of an openVPN setup?
>>> How are these tap devices connected to each other? Are they?
>>>
>>> a.
>>>
>>>
>>> On Jan 9, 2009, at 7:30 PM, Mark K. wrote:
>>>
>>>> i have two olsr nodes communicating through tap0 and tap1 virtual
>>>> devices.  But, I have two problems.  First, the nodes do not add  
>>>> each
>>>> other to their tables -- why is that?  And, I am getting this  
>>>> strange
>>>> error about socket associations (see below).
>>>>
>>>> 20 bytes from 192.168.2.21, socket associated tap0 really  
>>>> received on
>>>> tap0
>>>> 20 bytes from 192.168.2.21, socket associated tap0 really  
>>>> received on
>>>> tap0
>>>> 20 bytes from 192.168.2.21, socket associated tap0 really  
>>>> received on
>>>> tap0
>>>> 20 bytes from 192.168.3.22, socket associated tap0 really  
>>>> received on
>>>> tap1
>>>> 20 bytes from 192.168.3.22, socket associated tap0 really  
>>>> received on
>>>> tap1
>>>>
>>>>
>>>> Does anyone have any idea on how to fix this?  The messages are at
>>>> least being received but the table update does not seem to occur.
>>>>
>>>> Per previous discussions, I am starting olsrd with the -f option  
>>>> and
>>>> directing each olsrd agent to a separate olsrd.conf file.
>>>>
>>>> Thanks.
>>>>
>>>>
>>>>
>>>> -- 
>>>> Olsr-dev mailing list
>>>> (spam-protected)
>>>> http://lists.olsr.org/mailman/listinfo/olsr-dev
>>>
>>
>