[Olsr-dev] With medium/high traffic (using iperf) the wifi link turn off frequently (rate goes to 0Mb/s)

[Henning Rogge]

On Freitag 27 Februar 2009 19:18:37 andrea wrote:
> You can use quality of service, marking OLSR signaling messages with an
> adequate ToS/DSCP value; if the iperf throughput is very high, you have
> also to enable layer 2 qos, with 802.11e
Of course if you use iperf-TCP you will get no good throughput, even with QOS 
settings on 802.11 level. A few lost packages every second are enough to 
"kill" a TCP stream.

Henning

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20090228/141bce0a/attachment.sig>