[Olsr-dev] olsrd etx + plugin

[Erik Tromp]

Hello Hassan,

Please have a look also at https://sourceforge.net/projects/olsr-lc/ . That
might contain exactly the changes you are looking for.

Best regards,
Erik


________________________________

	Van: (spam-protected)
[mailto:(spam-protected)] Namens (spam-protected)
	Verzonden: zaterdag 18 april 2009 6:55
	Aan: (spam-protected)
	Onderwerp: [Olsr-dev] olsrd etx + plugin
	
	

	Hello all,

	 

	I have been working pretty hard trying to get an accurate estimation
of the bandwidth of links through the use of a plugin in olsrd. I have
successfully achieved this however I am still a little stuck on how to
incorporate this acquired bandwidth value with the default ETX values
calculated by olsrd. 

	 

	I was able to modify the link state database (i.e. tc_edge etx
values) to include the bandwidth but since olsrd is constantly updating
these values they are reset and eventually my bandwidth value is rendered
useless. Any suggestions on how to go about doing this through my plugin
without modifying the main olsrd code? Or is modifying the main parts of the
olsrd code where etx is calculated by accessing values in my plugin the only
way to go?

	 

	Thanks guys, 

	 

	-Hassan.