[olsr-dev] multiple interfaces and LQ

[Bruno Randolf]

hello!

i have problems using multiple interfaces with link quality enabled (0.4.8). 
the setup is: 2 nodes every one with 1 ethernet and one wlan, both connected 
to each other. so i get

--- 00:24:58.19 ---------------------------------------------------- LINKS

IP address       hyst   LQ     lost   total  NLQ    ETX
104.130.0.22     0.000  1.000  0      20     1.000  1.00
172.16.0.2       0.000  1.000  0      20     0.949  1.05

--- 00:24:58.19 ------------------------------------------------ NEIGHBORS

IP address       LQ     NLQ    SYM   MPR   MPRS  will
104.130.0.22     1.000  1.000  NO    NO    NO    3

the LQ and NLQs are fine (1.000) but still the link does not get symmetric. it 
works if i set "LinkQualityLevel 0" so maybe it's a bug in the LQ code?

or did i miss something?

greetings,
bruno
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20041230/e3f9eba9/attachment.sig>