<div dir="ltr"><div><div><div><div>There are no errors generated.  It all connects just to port 698.  All devices are found and it seems to have full knowledge of them all.  In client mode it has no issue and it all works.  In AP mode it refuses to send the hellos, identified by seeing nothing with tcpdump at the client.<br><br></div>Not sure how to fix it.  My skill level is like advanced mechanic level.  I can swap out an engine, but when something internal is awry I'm screwed.  I have updated the driver through 3 revisions and I have updated the kernel from 3.10.58 to 3.18.45.  I won't say it was easy but I did it and it works.  If there was a deep kernel issue I would be in the same boat.<br><br></div>Now I am swapping the qca driver for the ath9k and it is working.  It does not have the performance and I have a lot of enhancements to add, but OLSR works just fine, so I have to go with it.<br><br></div>Thanks for advice and concern.  It is appreciated.<br><br></div>Lonnie<br></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>Lonnie Nunweiler<br>Gigabit Gecko Ltd<br><br><span style="font-size:small">FREE Password Helper:   <a href="http://www.gigabit-gecko.com/" target="_blank">http://www.gigabit-gecko.com/</a></span><br>web: <a href="http://www.star-os.com/" target="_blank">http://www.star-os.com/</a><br>store: <a href="http://cue-link.com/store/" target="_blank">http://cue-link.com/store/</a><br></div></div></div></div>
<br><div class="gmail_quote">On Mon, May 15, 2017 at 11:19 PM, Henning Rogge <span dir="ltr"><<a href="mailto:hrogge@gmail.com" target="_blank">hrogge@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<br>
<br>
maybe you could describe what is happening when you connect Olsrd to<br>
the qca wireless interface?<br>
<br>
Do you see the UDP socket for the interface? Do you see OLSR packets<br>
(UDP port 698)?<br>
<br>
Henning Rogge<br>
<div class="HOEnZb"><div class="h5"><br>
On Mon, May 1, 2017 at 11:54 PM, Lonnie Nunweiler<br>
<<a href="mailto:lonnie.nunweiler@gmail.com">lonnie.nunweiler@gmail.com</a>> wrote:<br>
> Hi,<br>
><br>
> Im am charged with adding OLSRto an existing firmware based on the Qualcom<br>
> qca driver, which has been working for many years.<br>
><br>
> When OLSR runs it knows as much about the wireless as it does about the<br>
> Ethernet.  All ioctl calls have been checked and not a single error.The QCA<br>
> does not use NL80211 but from my research that is optional anyway.<br>
><br>
> To check for a stupid move on my part I changed to ath9k.  Same hardware,<br>
> same OS, just different driver.  It works perfectly.<br>
><br>
> Does anyone have an idea of what the issue could be and where I should begin<br>
> to look?  I've spent a week tracking and adding "OLSR_PRINTF(1," to see the<br>
> contents of the structures, but to me they all look OK, but it refuses to<br>
> announce any info for the wireless ports.<br>
><br>
> Thanks in advance.<br>
> Lonnie<br>
><br>
><br>
</div></div><span class="HOEnZb"><font color="#888888">> --<br>
> Olsr-users mailing list<br>
> <a href="mailto:Olsr-users@lists.olsr.org">Olsr-users@lists.olsr.org</a><br>
> <a href="https://lists.olsr.org/mailman/listinfo/olsr-users" rel="noreferrer" target="_blank">https://lists.olsr.org/<wbr>mailman/listinfo/olsr-users</a><br>
</font></span></blockquote></div><br></div>