<div dir="ltr">As of know i have three devices running olsrd 0.6.6.2 with network config  as follows<div>               r1-------r2------r3</div><div>r1 network configuration</div><div>mode adhoc</div><div>ip address 192.168.1.95</div><div>netmassk 255.255.255.0</div><div><br></div><div>r2  mode adhoc</div><div>ipaddress 192.168.1.25</div><div>netmask 255.255.255.0</div><div><br></div><div><div>r3  mode adhoc</div><div>ipaddress 192.168.1.45</div><div>netmask 255.255.255.0</div></div><div><br></div><div>the routing table of r1 shows r2 in 1st hop and r3 in second hop.</div><div>The hello packets are sent to r2 and r3, but r1 cant ping r3</div><div>The routing table of r2 does not have r1 and r3 in any hops but it receives hello packets from both and can ping both the devices</div><div><div>The routing table of r3 shows r2 in 1st hop and r1 in second hop.</div><div>The hello packets are sent to r2 and r1, but r3 cant ping r1</div></div><div><br></div><div>All the devices are running on wireless interface wlan0</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Oct 15, 2014 at 7:22 PM, pramod Jayram <span dir="ltr"><<a href="mailto:pramod.j94@gmail.com" target="_blank">pramod.j94@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><pre style="color:rgb(0,0,0)">Hello,

         My network  setting:

                 two laptops L1 and L2, run with olsrd-0.6.1 version.

                 two mesh routers R1 and R2, run with olsrd-0.5.6-r3
version (accompany with its openwrt OS).


                All the laptops are in adhoc mode 
                 
When olsrd on all the devices then

          ping from L1 to R1, it is success.
          ping  from R1 to R2, it is success.
          ping from R2 to L2, it is success.

         However, <br>              ping from L1 to R2, it is failed.
              ping from L2 to R1, it is failed.

         Therefore, the L1 can not talk with L2.

         Therefore, it seems my problem is that the olsrd can only talk with its direct neighbor, <br>but can not talk with nodes at two or more hops away. So is there anyone who has encountered this problem, or can anyone give me
some hint about how to solve this problem or bug in olsrd??
        <br>Thanks in advance</pre></div>
</blockquote></div><br></div>