<div dir="ltr">Hello, things are increasingly becoming clearer to me, I am very grateful to you for the time spent with my doubts beginner, feathers made a network with 4 routers to explore more, and gw 2 simple knots, and put the same configuration previous email on all routers, did a test as follows, called the router which is a 1 gw, called the 2 and 3 which are somentes us, they detected the gateway took the correct route and everything functioned normally, so I called the router 4 which is also a gw, after a few seconds routers changed their routes to the 4 because of being closer believe he found to be the best route, so far so good, so I cut the internet router 4, and waited to see if the routers changed the route back to router 1, but to my surprise it did not, I waited for over 30 minutes and they kept pointing to the router 4, then restarted the service olsr, alas they did correct route, I forgot something in the configuration dyn_gw? because I can not find my mistake ...<br>
<div class="gmail_extra"><br></div><div class="gmail_extra">Att.<br></div><div class="gmail_extra">Anderson Junior<br></div><div class="gmail_extra"><br><div class="gmail_quote">2014-04-07 3:32 GMT-04:00 Saverio Proto <span dir="ltr"><<a href="mailto:zioproto@gmail.com" target="_blank">zioproto@gmail.com</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">The idea is that you dont just check the default route but also<br>
specific networks that you announce via HNA.<br>
<br>
if cannot ping <a href="tel:192.168.81.12" value="+551921688112">192.168.81.12</a><br>
do not announce<br>
<br>
<a href="http://192.168.80.0/24" target="_blank">192.168.80.0/24</a> and <a href="http://192.168.81.0/24" target="_blank">192.168.81.0/24</a><br>
<br>
Saverio<br>
<br>
2014-04-07 1:00 GMT+02:00 ANDERSON JUNIOR GADO DA SILVA<br>
<div class="HOEnZb"><div class="h5"><<a href="mailto:andersonscinfo@gmail.com">andersonscinfo@gmail.com</a>>:<br>
> Hello, I made my setup like this:<br>
><br>
> PlParam "CheckInterval" "10000"<br>
> PlParam "PingInterval" "50"<br>
> PlParam "Ping" "10.4.0.1" #internal dns on my network that can be<br>
> accessed from anywhere on the network<br>
><br>
><br>
> so far I think I understand, the plugin will trickle case and find the ip<br>
> 10.4.0.1 keeps as gw, otherwise warns us that he is no longer a gw, now I<br>
> got a few questions, the first is, I can only put this code nodes that are<br>
> gw? the reason for the question is if I put these settings on the other<br>
> nodes, when they connect to any node that has internet it conceguira<br>
> dripping in 10.4.0.1 and thus will announce that it is a gw, but it is<br>
> actually a client node, where the cord does not reach internet but serves to<br>
> bring internet to inside the house.<br>
><br>
> My second doubt is:<br>
><br>
> # First group of HNAs with related ping host<br>
> PlParam "HNA" "192.168.80.0 255.255.255.0"<br>
> PlParam "HNA" "192.168.81.0 255.255.255.0"<br>
> PlParam "Ping" "192.168.81.12"<br>
><br>
> # Second HNA group with multiple related ping hosts.<br>
> # Specifying multiple ping hosts provides redundancy.<br>
> PlParam "HNA" "192.168.100.0 255.255.255.0"<br>
> PlParam "HNA" "192.168.101.0 255.255.255.0"<br>
> PlParam "HNA" "192.168.102.0 255.255.255.0"<br>
> PlParam "Ping" "192.168.100.10"<br>
> PlParam "Ping" "192.168.101.10"<br>
><br>
> # Third HNA group without ping check<br>
> PlParam "HNA" "192.168.200.0 255.255.255.0"<br>
> PlParam "HNA" "192.168.201.0 255.255.255.0"<br>
> PlParam "HNA" "192.168.202.0 255.255.255.0"<br>
><br>
><br>
><br>
> even reading several times I do not understand this snippet concegui<br>
> parameters<br>
><br>
> Att<br>
> Anderson Junior<br>
><br>
><br>
> 2014-04-06 18:36 GMT-04:00 ANDERSON JUNIOR GADO DA SILVA<br>
> <<a href="mailto:andersonscinfo@gmail.com">andersonscinfo@gmail.com</a>>:<br>
><br>
>> Ok, thanks for the tip I will read and take the tests, come back to ask<br>
>> any questions, but thank you very much.<br>
>><br>
>> Att<br>
>> Anderson Junior<br>
>><br>
>><br>
>> 2014-04-06 15:56 GMT-04:00 Saverio Proto <<a href="mailto:zioproto@gmail.com">zioproto@gmail.com</a>>:<br>
>><br>
>>> Hello,<br>
>>> here you find how to configure the dyn_gw plugin:<br>
>>><br>
>>><br>
>>> <a href="http://olsr.org/git/?p=olsrd.git;a=blob;f=lib/dyn_gw/README_DYN_GW;h=0aea1f9d3340938ce128295964a81dd8d32b7f64;hb=release-0.6.6" target="_blank">http://olsr.org/git/?p=olsrd.git;a=blob;f=lib/dyn_gw/README_DYN_GW;h=0aea1f9d3340938ce128295964a81dd8d32b7f64;hb=release-0.6.6</a><br>
>>><br>
>>> in the source code tarball, for every plugin there is a README file.<br>
>>><br>
>>> Saverio<br>
>>><br>
>>><br>
>>><br>
>>> 2014-04-06 15:54 GMT+02:00 ANDERSON JUNIOR GADO DA SILVA<br>
>>> <<a href="mailto:andersonscinfo@gmail.com">andersonscinfo@gmail.com</a>>:<br>
>>> > Hello, until now I was using only one gateway in my small network, so I<br>
>>> > decided to add a new gateway so far so good, let's go to my experience,<br>
>>> > I<br>
>>> > believe I have done anything wrong, while adding new node I configured<br>
>>> > the<br>
>>> > wan interface ip addr d, called automatically when the radio he took<br>
>>> > with<br>
>>> > gateway, but he was not yet, because I still had internet, I was just<br>
>>> > connected to a switch, the closest we have also identified it as a<br>
>>> > gateway<br>
>>> > and changed its table routing, even though he was not yet a true<br>
>>> > gateway, as<br>
>>> > much as I restart, it remains the gateway, but does not have internt,<br>
>>> > has<br>
>>> > some parameter or setting that we test and see that it is not a true<br>
>>> > gateway<br>
>>> > and back for true route?<br>
>>> > my setup is as follows:<br>
>>> ><br>
>>> > DebugLevel 0<br>
>>> > AllowNoInt yes<br>
>>> > IpVersion 4<br>
>>> > LinkQualityLevel 2<br>
>>> > ClearScreen yes<br>
>>> ><br>
>>> > LoadPlugin "olsrd_arprefresh.so.0.1"<br>
>>> > {<br>
>>> > }<br>
>>> ><br>
>>> > LoadPlugin "olsrd_dyn_gw.so.0.5"<br>
>>> > {<br>
>>> > }<br>
>>> ><br>
>>> > LoadPlugin "olsrd_nameservice.so.0.3"<br>
>>> > {<br>
>>> > PlParam "name" "gwsc1"<br>
>>> > }<br>
>>> ><br>
>>> > LoadPlugin "olsrd_txtinfo.so.0.1"<br>
>>> > {<br>
>>> > PlParam "accept" "0.0.0.0"<br>
>>> > }<br>
>>> ><br>
>>> > Interface "wlan0"<br>
>>> > {<br>
>>> > }<br>
>>> ><br>
>>> > Att<br>
>>> > Anderson Junior<br>
>>> ><br>
>>> > --<br>
>>> > Olsr-users mailing list<br>
>>> > <a href="mailto:Olsr-users@lists.olsr.org">Olsr-users@lists.olsr.org</a><br>
>>> > <a href="https://lists.olsr.org/mailman/listinfo/olsr-users" target="_blank">https://lists.olsr.org/mailman/listinfo/olsr-users</a><br>
>><br>
>><br>
>><br>
><br>
><br>
</div></div></blockquote></div><br><br></div></div>