<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Hi<div><br></div><div> I remember my radio nodes had IP like 10.0.1.x and loopback interface was like 169.254.x.x not exactly i think . But what i m getting from you now is that my radio node should not be set to any IP but what should i set to loopback interface ?</div><div><br></div><div>Salman<br><br><div>> From: hrogge@gmail.com<br>> Date: Mon, 24 Mar 2014 11:25:07 +0100<br>> Subject: Re: [Olsr-users] Dual Radio on OLSRd2<br>> To: salmanhaider5@hotmail.com<br>> CC: olsr-users@lists.olsr.org<br>> <br>> Hi,<br>> <br>> I did most of my tests with linklocal IPs on the interfaces, do you<br>> remember what exactly you tried to do?<br>> <br>> Normally this should be the easiest way:<br>> <br>> 1) don't set any IP address on the mesh interfaces (they will only<br>> have the IPv6 linklocal address).<br>> 2) add your "node address" (both IPv4 and IPv6) to the loopback interface.<br>> 3) run olsrd2 with all mesh interfaces AND the loopback as parameters<br>> (e.g. "olsrd2 wlan0 wlan1 lo").<br>> <br>> Olsrd2 should automatically select IPv4 linklocal addresses for each<br>> interface after a few seconds.<br>> <br>> Henning Rogge<br>> <br>> On Mon, Mar 24, 2014 at 11:20 AM, Syed Salman Haider Rizvi<br>> <salmanhaider5@hotmail.com> wrote:<br>> > Ok i can try this can you please give me a sample network file with<br>> > interfaces lo wlan0 wlan1 or suggest me some website because i remember<br>> > trying the link local ip last time but it was not working<br>> ><br>> > Salman<br>> ><br>> >> From: hrogge@gmail.com<br>> >> Date: Mon, 24 Mar 2014 11:12:14 +0100<br>> ><br>> >> Subject: Re: [Olsr-users] Dual Radio on OLSRd2<br>> >> To: salmanhaider5@hotmail.com<br>> >> CC: olsr-users@lists.olsr.org<br>> >><br>> >> No,<br>> >><br>> >> its not compulsory. Its just that you CAN do it this way.<br>> >><br>> >> I still would suggest NOT using the same IP on both interfaces. You<br>> >> could use LAN and WLAN interface, but olsrd2 would send Hello messages<br>> >> through the LAN interface in this case.<br>> >><br>> >> Henning<br>> >><br>> >> On Mon, Mar 24, 2014 at 11:09 AM, Syed Salman Haider Rizvi<br>> >> <salmanhaider5@hotmail.com> wrote:<br>> >> > Is it compulsory to use loopback IP . Can we use just only both radio<br>> >> > and<br>> >> > maybe a lan interface . Also radio IP will be different should subnet be<br>> >> > the<br>> >> > same and SSID ?<br>> >> ><br>> >> > Salman<br>> >> ><br>> >> ><br>> >> ><br>> >> >> From: hrogge@gmail.com<br>> >> >> Date: Mon, 24 Mar 2014 10:59:51 +0100<br>> >> >> Subject: Re: [Olsr-users] Dual Radio on OLSRd2<br>> >> >> To: salmanhaider5@hotmail.com<br>> >> >> CC: olsr-users@lists.olsr.org<br>> >> ><br>> >> >><br>> >> >> Hi,<br>> >> >><br>> >> >> in my opinion you should NEVER use the same IP address on different<br>> >> >> interfaces.<br>> >> >><br>> >> >> Give each interface its own (linklocal) address, add a "node address"<br>> >> >> to the loopback interface and add the loopback interface to the list<br>> >> >> of olsrd2 interfaces, e.g.:<br>> >> >><br>> >> >> ./olsrds wlan0 wlan1 lo<br>> >> >><br>> >> >> Henning Rogge<br>> >> >><br>> >> >> On Mon, Mar 24, 2014 at 10:45 AM, Syed Salman Haider Rizvi<br>> >> >> <salmanhaider5@hotmail.com> wrote:<br>> >> >> > Hi ,<br>> >> >> > We know that olsrd2 works with many interfaces . Here i want to run<br>> >> >> > my dual radio concurrently with olsrd2 . So do i need same IP on both<br>> >> >> > radio<br>> >> >> > and same SSID ?<br>> >> >> ><br>> >> >> > Thanks<br>> >> >> ><br>> >> >> > Salman<br>> >> >> ><br>> >> >> > --<br>> >> >> > Olsr-users mailing list<br>> >> >> > Olsr-users@lists.olsr.org<br>> >> >> > https://lists.olsr.org/mailman/listinfo/olsr-users<br></div></div> </div></body>
</html>