<div>Hi</div> <div> </div> <div>This mail is a follow up to the discussions we had way back in Dec 8th (multiple ip address on the olsrd iface) (<A href="http://www.olsr.org/pipermail/olsr-users/2005-December/085636.html">http://www.olsr.org/pipermail/olsr-users/2005-December/085636.html</A>)</div> <div> </div> <div>At that time, i remember you saying that you would address this problem after 0.4.10 release. Now that it has been nearly 2 months of .10 release, can you please try solving this problem if time permits.</div> <div> </div> <div>I suspect that the link table, neighbor set and,2 -hop neighbor tables are not getting flushed as soon as the address changes.</div> <div> </div> <div>Let me elobrate my scenario again for you to analyse</div> <div> </div> <div>I have 3 neighbor nodes (n1,n2 and n3). n1 has two interfaces (one wired (eth2) and one ad-hoc wireless (eth1)); olsrd runs on both the ifaces and eth2 HNA's to the external ipv6
network. Other 2 nodes n2 and n3 has olsrd running on only one iface (eth1). </div> <DIV> </DIV> <DIV> ------- (eth2)n1(eth1)----n2(eth1)---n3(eth1)----<BR> <BR> </DIV> <DIV><BR>My IP configs are below</DIV> <DIV> </DIV> <DIV>N1:</DIV> <DIV>HNA: 2001:100:200:1::/64<BR>eth2:2001:620:500:8::2/64 <BR>eth1:2001:620:500:30::1/64</DIV> <DIV> </DIV> <DIV>N2: </DIV> <DIV>eth1: 2001:620:500:5::1/64 (to start with)<BR>(later add): 2001:620:500:6::1/64</DIV> <DIV> </DIV> <DIV>N3:<BR>eth1: 2001:620:500:5::2/64 (to start with)<BR>(later add): 2001:620:500:6::2/64</DIV> <DIV> </DIV> <DIV>I start with only one Ipv6 address assigned to the eth1 of n2 and n3 (2001:620:500:5::1/64 and 2001:620:500:5::2/64 respectively). i run olsr and works fine. I could ping6 the neighbours. Now i add another ipv6
address to eth1 of n2 and n3 (2001:620:500:6::1/64 and 2001:620:500:6::2/64 respectively). Now i find olsrd running and the routing table is formed but they dont seem to be correct. Also when i ping6 the neighbors iam unable to. </DIV> <DIV>I am attaching my logs files (ethereal capture, olsrd debug msg and routing table).(olsr_ipv6_log.tgz)</DIV> <DIV> </DIV> <DIV>N1 log files</DIV> <DIV>ethereal-n1<BR>olsr-n1<BR>route-n1-address1 (only one address assigned to eth1 of n2 and n3 (2001:620:500:5::1/64and </DIV> <DIV>2001:620:500:5::2/64 respectively)</DIV> <DIV>route-n1-address2 (2 addresses assigned to eth1 of n2 and n3 (2001:620:500:5::1/64, </DIV> <DIV>2001:620:500:6::1/64 and 2001:620:500:5::2/64, 2001:620:500:6::2/64 respectively)</DIV> <DIV> </DIV> <DIV>N2 log files</DIV> <DIV>ethereal-n2<BR>olsr-n2<BR>route-n2-address1 (only one address assigned to n2 and n3 (2001:620:500:5::1/64and </DIV> <DIV>2001:620:500:5::2/64
respectively)<BR>route-n2-address2 (2 addresses assigned to eth1 of n2 and n3 (2001:620:500:5::1/64, </DIV> <DIV>2001:620:500:6::1/64 and 2001:620:500:5::2/64, 2001:620:500:6::2/64 respectively)</DIV> <DIV><BR>N3 log files</DIV> <DIV>ethereal-n3<BR>olsr-n3<BR>route-n3-address1 (only one address assigned to n2 and n3 (2001:620:500:5::1/64and </DIV> <DIV>2001:620:500:5::2/64 respectively)<BR>route-n3-address2 (2 addresses assigned to eth1 of n2 and n3 (2001:620:500:5::1/64, </DIV> <DIV>2001:620:500:6::1/64 and 2001:620:500:5::2/64, 2001:620:500:6::2/64 respectively)</DIV> <DIV> </DIV> <DIV>Please find attached the log files.</DIV> <DIV> </DIV> <DIV>Eagerly waiting for suggestions.Kindly let me know if any further informations are necessary</DIV> <DIV> </DIV> <DIV> </DIV> <DIV>Many Thanks</DIV> <DIV>Magesh<BR></DIV> <div> </div><p>
<hr size=1> Yahoo! Mail<br>
<a href="http://us.rd.yahoo.com/mail_us/taglines/pmall2/*http://photomail.mail.yahoo.com">Use Photomail</a> to share photos without annoying attachments.