[Olsr-users] default gateway shown in hna isn't in route table

[Érico Porto]

Uhm, ok, reading it now. For the moment I just left the SmartGW feature
off, just to read the default gateway in the deprecated table.

Thanks Teco!

Érico V. Porto


On Fri, Feb 17, 2012 at 12:33 PM, Teco Boot <(spam-protected)> wrote:

> Please use ip route, if you use iproute2. You do.
> route should be deprecated. It can use it for main table only.
> You could read a manual.
>
> Teco
>
> Op 17 feb. 2012, om 15:13 heeft Érico Porto het volgende geschreven:
>
> > On Fri, Feb 17, 2012 at 5:04 AM, Markus Kittenberger <
> (spam-protected)> wrote:
> >
> >
> > On Fri, Feb 17, 2012 at 7:55 AM, Teco Boot <(spam-protected)> wrote:
> > PLEASE DON"T SHOUT ...
> >
> > So you have all functions you want, but want to know why?
> > If you use SmartGW, the default is not in the main table.
> > same apllies if u use RtTable or RtTableDefault.
> > Check with ip route show table all
> >
> > Teco
> >
> > Op 17 feb. 2012, om 02:38 heeft Érico Porto het volgende geschreven:
> >
> >> I'm simply uncommenting the line after "# hna4 - internet gateway:" and
> changing from #0.0.0.0 0.0.0.0 to 0.0.0.0 0.0.0.0. Do I have to do anything
> beside this on any of the nodes to enable one of them as internet gateway?
> >>
> >> Érico V. Porto
> >>
> >>
> >> On Thu, Feb 16, 2012 at 5:43 PM, Érico Porto <(spam-protected)>
> wrote:
> >> Hello
> >>
> >> I'm using olsrd 0.6.2, and I'm having a strange bug here. I have two
> nodes, one is connected to the internet, through cable, and the other
> isn't. These two nodes wireless interfaces are connected, and one of them
> is configured as internet gateway. If I type route -n in the internet
> gateway node, I can see my default gateway is my ethernet interface.
> >>
> >> Ok, no I'm at the other node. I type route -n and I have no default
> gateway set. I type telnet localhost 2006, and get all the information I
> expect, including the first node listed as default in the hna section. Why
> I see no default gateway set when typing route -n?
> >>
> >> The real problem is because I AM ABLE TO ACCESS THE INTERNET FROM THIS
> NODE. I have no dns, but it's ok, I don't want it, but any ip I type in
> browser on a computer connected to this node get's me to the right webpage!
> >>
> >> Regards
> >>
> >> Érico V. Porto
> >>
> >> --
> >> Olsr-users mailing list
> >> (spam-protected)
> >> https://lists.olsr.org/mailman/listinfo/olsr-users
> >
> >
> > --
> > Olsr-users mailing list
> > (spam-protected)
> > https://lists.olsr.org/mailman/listinfo/olsr-users
> >
> >
> > Uhm, thanks, found my default gateway using ip route show table all.
> @Teco You've said that showing in the other routing table is not default,
> but is there an option so I can see it there also? (using route -n)
> >
> > But yeah, the whole question was about how that was possible really.
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20120217/a4408709/attachment.html>