<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Henning all the settings are absolutely fine according to your wiki link but still i m unable to connect (i checked SSID , IP , and Mode SSID is same , IP for both on the same network 10.0.1.4 , 10.0.1.5 and mode is ad-hoc) so why can't i connect ?<br><br><div>> Date: Mon, 23 Sep 2013 14:27:35 +0200<br>> From: henning.rogge@fkie.fraunhofer.de<br>> To: salmanhaider5@hotmail.com<br>> CC: olsr-dev@lists.olsr.org<br>> Subject: Re: [Olsr-dev] OLSRv2 release version 0.3.0<br>> <br>> On 09/23/2013 01:13 PM, Syed Salman Haider Rizvi wrote:<br>> > I m unable to communicate with neighbour . By the way i admit after<br>> > changing the lan1/lan2/lan3 multicast errors gone but for the same<br>> > configuration i m using olsrd stable git for long time without error but<br>> > in your case this reduced some errors.<br>> <br>> Yes, OLSRd1 didn't used multicast but went for broadcasts, either<br>> network wide broadcast or global broadcast. Both have their own problems.<br>> <br>> I hope that the future of IP mesh networks is linklocal IPv4/6 addresses<br>> on the interfaces and only one mesh-wide global IPv4/6 address on the<br>> loopback interface.<br>> <br>> > By the way can you please find<br>> > out why i m not able to communicate on my openwrt ?<br>> <br>> Did you had a look at the wiki link I sent you? As long as you have no<br>> IP connectivity between direct neighbors there is nothing OLSRd(2) can<br>> do for you.<br>> <br>> Henning Rogge<br>> <br>> -- <br>> Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für<br>> Kommunikation, Informationsverarbeitung und Ergonomie FKIE<br>> Kommunikationssysteme (KOM)<br>> Fraunhofer Straße 20, 53343 Wachtberg, Germany<br>> Telefon +49 228 9435-961, Fax +49 228 9435 685<br>> mailto:henning.rogge@fkie.fraunhofer.de http://www.fkie.fraunhofer.de<br>> <br></div> </div></body>
</html>