Hi, sorry, I sent the wrong log. I need to compile Olsrd with the flag "-msoft-float", otherwise the printf shows only 0's.<br>But this doesn't affect the olsrd internal working.<br>The correct log is:<br>
<br> *** <a href="http://olsr.org">olsr.org</a> - 0.6.4-git_-hash_818b16a4ec8c80b704eadb83ce3cc45e - ***<br> Build date: 2013-03-27 13:40:47 on dgdiniz-desktop<br> <a href="http://www.olsr.org">http://www.olsr.org</a><br>
<br>Parsing file: "/etc/olsrd.conf"<br>Smart gateway system: disabled<br>Link quality fish eye 0<br><br>Interface Defaultssetting ifs_in_curr_cfg = 0<br> HELLO interval: 1.00<br> HELLO validity: 10.00<br>
TC interval: 5.00<br> TC validity: 60.00<br> MID interval: 5.00<br> MID validity: 60.00<br> HNA interval: 5.00<br> HNA validity: 60.00<br> Mode: mesh<br> IPv4 broadcast/multicast : AUTO (d)<br>
Mode : mesh (d)<br> IPv6 multicast : ff02::6d<br> HELLO emission/validity : 2.00/20.00<br> TC emission/validity : 5.00/300.00<br> MID emission/validity : 5.00/300.00<br>
HNA emission/validity : 5.00/300.00<br> Autodetect changes : yes<br> IPv4 broadcast/multicast : AUTO<br> Mode : mesh (d)<br> IPv6 multicast : ::<br> HELLO emission/validity : 1.00/10.00<br>
TC emission/validity : 5.00/60.00<br> MID emission/validity : 5.00/60.00<br> HNA emission/validity : 5.00/60.00<br> Autodetect changes : no<br><a href="http://olsr.org">olsr.org</a> - 0.6.4-git_-hash_818b16a4ec8c80b704eadb83ce3cc45e - detaching from the current process...<br>
<br>My olsrd.conf is:<br><br><br><br><br><br>#<br># OLSR.org routing daemon config file<br># This file contains the usual options for an ETX based<br># stationary network without fisheye<br># (for other options see olsrd.conf.default.full)<br>
#<br># Lines starting with a # are discarded<br>#<br><br>#### ATTENTION for IPv6 users ####<br># Because of limitations in the parser IPv6 addresses must NOT<br># begin with a ":", so please add a "0" as a prefix.<br>
<br>###########################<br>### Basic configuration ###<br>###########################<br># keep this settings at the beginning of your first configuration file<br><br># Debug level (0-9)<br># If set to 0 the daemon runs in the background, unless "NoFork" is set to true<br>
# (Default is 1)<br><br># DebugLevel 1<br><br># IP version to use (4 or 6)<br># (Default is 4)<br><br># IpVersion 4<br><br>#################################<br>### OLSRd agent configuration ###<br>#################################<br>
# this parameters control the settings of the routing agent which are not<br># related to the OLSR protocol and it's extensions<br><br># FIBMetric controls the metric value of the host-routes OLSRd sets.<br># - "flat" means that the metric value is always 2. This is the preferred value<br>
# because it helps the linux kernel routing to clean up older routes<br># - "correct" use the hopcount as the metric value.<br># - "approx" use the hopcount as the metric value too, but does only update the<br>
# hopcount if the nexthop changes too<br># (Default is "flat")<br><br># FIBMetric "flat"<br><br>#######################################<br>### Linux specific OLSRd extensions ###<br>#######################################<br>
# these parameters are only working on linux at the moment, but might become<br># useful on BSD in the future<br><br># SrcIpRoutes tells OLSRd to set the Src flag of host routes to the originator-ip<br># of the node. In addition to this an additional localhost device is created<br>
# to make sure the returning traffic can be received.<br># (Default is "no")<br><br># SrcIpRoutes no<br><br># Specify the proto tag to be used for routes olsr inserts into kernel<br># currently only implemented for linux<br>
# valid values under linux are 1 .. 254<br># 1 gets remapped by olsrd to 0 UNSPECIFIED (1 is reserved for ICMP redirects)<br># 2 KERNEL routes (not very wise to use)<br># 3 BOOT (should in fact not be used by routing daemons)<br>
# 4 STATIC <br># 8 .. 15 various routing daemons (gated, zebra, bird, & co)<br># (defaults to 0 which gets replaced by an OS-specific default value<br># under linux 3 (BOOT) (for backward compatibility)<br><br># RtProto 0<br>
<br># Activates (in IPv6 mode) the automatic use of NIIT<br># (see README-Olsr-Extensions)<br># (default is "yes")<br><br># UseNiit yes<br><br># Activates the smartgateway ipip tunnel feature.<br># See README-Olsr-Extensions for a description of smartgateways.<br>
# (default is "no")<br><br>SmartGateway no<br><br># Allows the selection of a smartgateway with NAT (only for IPv4)<br># (default is "yes")<br><br># SmartGatewayAllowNAT yes<br><br># Defines what kind of Uplink this node will publish as a<br>
# smartgateway. The existence of the uplink is detected by<br># a route to <a href="http://0.0.0.0/0">0.0.0.0/0</a>, ::ffff:0:0/96 and/or 2000::/3.<br># possible values are "none", "ipv4", "ipv6", "both"<br>
# (default is "both")<br><br># SmartGatewayUplink "both"<br><br># Specifies if the local ipv4 uplink use NAT<br># (default is "yes")<br><br># SmartGatewayUplinkNAT yes<br><br># Specifies the speed of the uplink in kilobit/s.<br>
# First parameter is upstream, second parameter is downstream<br># (default is 128/1024)<br><br># SmartGatewaySpeed 128 1024<br><br># Specifies the EXTERNAL ipv6 prefix of the uplink. A prefix<br># length of more than 64 is not allowed.<br>
# (default is 0::/0<br><br># SmartGatewayPrefix 0::/0<br><br>##############################<br>### OLSR protocol settings ###<br>##############################<br><br># HNA (Host network association) allows the OLSR to announce<br>
# additional IPs or IP subnets to the net that are reachable<br># through this node.<br># Syntax for HNA4 is "network-address network-mask"<br># Syntax for HNA6 is "network-address prefix-length"<br>
# (default is no HNA)<br>Hna4<br>{<br># Hna4 - Internet gateway:<br>#0.0.0.0 0.0.0.0 <br># Hna4 - more entries can be added:<br>#off168.10.0 255.255.255.0 <br>#off168.11.0 255.255.255.0 <br>#off168.12.0 255.255.255.0 <br>
#off168.13.0 255.255.255.0 <br>#off168.14.0 255.255.255.0 <br>}<br>Hna6<br>{<br># Internet gateway<br># 0:: 0<br># specific small networks reachable through this node<br># fec0:2200:106:0:0:0:0:0 48<br>
}<br><br>################################<br>### OLSR protocol extensions ###<br>################################<br><br># Link quality algorithm (only for lq level 2)<br># (see README-Olsr-Extensions)<br># - "etx_float", a floating point ETX with exponential aging<br>
# - "etx_fpm", same as ext_float, but with integer arithmetic<br># - "etx_ff" (ETX freifunk), an etx variant which use all OLSR<br># traffic (instead of only hellos) for ETX calculation<br># - "etx_ffeth", an incompatible variant of etx_ff that allows<br>
# ethernet links with ETX 0.1.<br># (defaults to "etx_ff")<br><br># LinkQualityAlgorithm "etx_ff"<br><br># Fisheye mechanism for TCs (0 meansoff, 1 means on)<br># (default is 1)<br><br>LinkQualityFishEye 0<br>
<br>#####################################<br>### Example plugin configurations ###<br>#####################################<br># Olsrd plugins to load<br># This must be the absolute path to the file<br># or the loader will use the following scheme:<br>
# - Try the paths in the LD_LIBRARY_PATH <br># environment variable.<br># - The list of libraries cached in /etc/ld.so.cache<br># - /lib, followed by /usr/lib<br>#<br># the examples in this list are for linux, so check if the plugin is<br>
# available if you use windows/BSD.<br># each plugin should have a README file in it's lib subfolder<br><br># LoadPlugin "olsrd_txtinfo.dll"<br>LoadPlugin "olsrd_txtinfo.so.0.1"<br>{<br> # port number the txtinfo plugin will be listening, default 2006<br>
# PlParam "port" "81"<br> # ip address that can access the plugin, use "0.0.0.0"<br> # to allow everyone<br> PlParam "Accept" "127.0.0.1"<br>}<br><br>
LoadPlugin "olsrd_dot_draw.so.0.3"<br>{<br> PlParam "Accept" "127.0.0.1"<br>}<br><br>LoadPlugin "olsrd_jsoninfo.so.0.0"<br>{<br> # the default port is 9090 but you can change it like this:<br>
PlParam "port" "9090"<br><br> # You can set a "accept" single address to allow to connect to<br> # jsoninfo. If no address is specified, then localhost (127.0.0.1)<br> # is allowed by default. jsoninfo will only use the first "accept"<br>
# parameter specified and will ignore the rest.<br><br> # to allow a specific host:<br> #PlParam "accept" "172.29.44.23"<br> # if you set it to 0.0.0.0, it will accept all connections<br>
PlParam "accept" "0.0.0.0"<br><br> # specify a UUID for this node to track it for debugging<br> #PlParam "UUIDFile" "/etc/olsrd/olsrd.uuid"<br>}<br><br>#############################################<br>
### OLSRD default interface configuration ###<br>#############################################<br># the default interface section can have the same values as the following<br># interface configuration. It will allow you so set common options for all<br>
# interfaces.<br><br>InterfaceDefaults {<br> # Ip4Broadcast 255.255.255.255<br>}<br><br>######################################<br>### OLSRd Interfaces configuration ###<br>######################################<br>
# multiple interfaces can be specified for a single configuration block<br># multiple configuration blocks can be specified<br><br># WARNING, don't forget to insert your interface names here !<br>Interface "wlan0"<br>
{<br> # Interface Mode is used to prevent unnecessary<br> # packet forwarding on switched ethernet interfaces<br> # valid Modes are "mesh" and "ether"<br> # (default is "mesh")<br>
<br> HelloInterval 1.0<br> HelloValidityTime 10.0<br> TcInterval 5.0<br> TcValidityTime 60.0<br> MidInterval 5.0<br> MidValidityTime 60.0<br> HnaInterval 5.0<br> HnaValidityTime 60.0<br>
<br> Mode "mesh"<br>}<br><br><br><div class="gmail_quote">On Wed, Mar 27, 2013 at 12:41 PM, Henning Rogge <span dir="ltr"><<a href="mailto:hrogge@googlemail.com" target="_blank">hrogge@googlemail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Default and interface timings all zero? That sounds badly wrong.<br>
<br>
Can you post your olsr config file?<br>
<br>
Henning<br>
<div class="HOEnZb"><div class="h5"><br>
<br>
On Wed, Mar 27, 2013 at 4:38 PM, Douglas Diniz <<a href="mailto:dgdiniz@gmail.com">dgdiniz@gmail.com</a>> wrote:<br>
> Hi, I was using Olsrd 0.6.4 and now I updated to 0.6.5.2.<br>
> I'm cross-compiling to PowerPc.<br>
><br>
> Now when I run "olsrd -f /etc/olsrd.conf" the process freezes, and stops at<br>
> this point:<br>
><br>
> *** <a href="http://olsr.org" target="_blank">olsr.org</a> - 0.6.5.2-git_-hash_64c0ebc7d623ac4986be69c7f7130d13 - ***<br>
> Build date: 2013-03-27 11:50:13 on dgdiniz-desktop<br>
> <a href="http://www.olsr.org" target="_blank">http://www.olsr.org</a><br>
><br>
><br>
> Sometimes the process starts fine, but most of the time the process stops at<br>
> this point.<br>
> Other times the process continue to run after some seconds, but most of time<br>
> it freezes for a long time.<br>
><br>
><br>
> Olsrd version 0.6.4 starts fine every time:<br>
><br>
> *** <a href="http://olsr.org" target="_blank">olsr.org</a> - 0.6.4-git_-hash_9297fc2b2ddda43b84f0e26d5f2e06be - ***<br>
> Build date: 2012-11-16 11:57:22 on dgdiniz-desktop<br>
> <a href="http://www.olsr.org" target="_blank">http://www.olsr.org</a><br>
><br>
> Parsing file: "/etc/olsrd.conf"<br>
> Smart gateway system: disabled<br>
> Link quality fish eye 0<br>
><br>
> Interface Defaultssetting ifs_in_curr_cfg = 0<br>
> HELLO interval: 0.00<br>
> HELLO validity: 0.00<br>
> TC interval: 0.00<br>
> TC validity: 0.00<br>
> MID interval: 0.00<br>
> MID validity: 0.00<br>
> HNA interval: 0.00<br>
> HNA validity: 0.00<br>
> Mode: mesh<br>
> IPv4 broadcast/multicast : AUTO (d)<br>
> Mode : mesh (d)<br>
> IPv6 multicast : ff02::6d<br>
> HELLO emission/validity : 0.00L�/0.00(null)<br>
> TC emission/validity : 0.00L�/0.00(null)<br>
> MID emission/validity : 0.00L�/0.00(null)<br>
> HNA emission/validity : 0.00L�/0.00(null)<br>
> Autodetect changes : yes<br>
> IPv4 broadcast/multicast : AUTO<br>
> Mode : mesh (d)<br>
> IPv6 multicast : ::<br>
> HELLO emission/validity : 0.00L�/0.00(null)<br>
> TC emission/validity : 0.00L�/0.00(null)<br>
> MID emission/validity : 0.00L�/0.00(null)<br>
> HNA emission/validity : 0.00L�/0.00(null)<br>
> Autodetect changes : no<br>
> <a href="http://olsr.org" target="_blank">olsr.org</a> - 0.6.4-git_-hash_9297fc2b2ddda43b84f0e26d5f2e06be - detaching<br>
> from the current process...<br>
><br>
><br>
><br>
> Someone knows what is happening?<br>
><br>
> Thanks<br>
><br>
</div></div><span class="HOEnZb"><font color="#888888">> --<br>
> Olsr-dev mailing list<br>
> <a href="mailto:Olsr-dev@lists.olsr.org">Olsr-dev@lists.olsr.org</a><br>
> <a href="https://lists.olsr.org/mailman/listinfo/olsr-dev" target="_blank">https://lists.olsr.org/mailman/listinfo/olsr-dev</a><br>
<br>
<br>
<br>
--<br>
We began as wanderers, and we are wanderers still. We have lingured<br>
long enough on the shores of the cosmic ocean. We are ready at last to<br>
set sail for the stars - Carl Sagan<br>
</font></span></blockquote></div><br><br clear="all"><br><a href="mailto:thedougdiniz@hotmail.com" target="_blank"></a>